Installation & Assembly

BOOKSHELF RACK
PR8a, PR8b
If you need assistance, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Enclosed you will find everything
needed for the assembly and use of
your bookshelf rack. Two people make
assembly and installation easier. The
parts and hardware included are:
Hardware included:
2 –3/8” x ½” Button Head Screws
4 – 2” Lag Screw
1 – 7/32” Allen Wrench
Toggle Kit
Components included:
1 – Rectangular Base
2 – Arms
1 – Grid
12 – Angled Pot Hooks – 12” shelf
6 – Angled Pot Hooks – 8” shelf
6 - Straight Pot Hooks - 8" shelf
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1) If your rack is plated it is best to keep the tissue on during installation to avoid fingerprinting.
2) It is very important to determine the front and back of the rectangular base. The front has two threaded holes and the back has
two large unthreaded holes.
3) Turn the rectangular base so that the rivets are closest to the bottom. Using the Allen wrench and the two 3/8” x ½” button head
screws, attach the arms to the rack body through the threaded holes in the front.
4) We recommend that you anchor your rack into the solid wood of wall studs. Carefully measure the area where the rack is to be
hung and install the lag screw directly into the wood studs. If it is not convenient to hang your rack directly into wood you may
use the included DRYWALL anchors enclosed with your rack. See Toggler® brand manufacturer recommendations for weight
limits included in the instructions in the Toggler kit.
5) After the rack has been mounted onto the wall, place the grid into it with the long wires facing up. Push the grid against the back
of the rack so there is clearance for the pot hooks to hang along the front bar.
6) Distribute the weight of your cookware evenly around the rack and grid.
WARNING: It is important that your bookshelf rack is assembled correctly. If the unit is assembled or used incorrectly, it could become unstable and
collapse, possibly causing injury.
LIMITED WARRANTY: This product is warranted to be free of material defects, other than that from normal use, for a period of five years from the
date of purchase. Customer's exclusive remedy shall be the repair or replacement of the defective product and shall be subject to the following
conditions: (1) notice of any defect is received by Enclume within the warranty period and (2) customer returns the defective product to Enclume
Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20 days following a return authorization number (which may be
obtained by telephoning the number at the top of this instructions) being provided to the customer by Enclume. There are no other warranties,
expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY
DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.