Instructions / Assembly

ASSEMBLY AND INSTALLATION INSTRUCTIONS for the LR1A and LR1B
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 – 3/8” x 5/8” Button head screws
2 – 3/8” x ½” Button head screws
1 – 7/32” Allen wrench
4 – Hard Glides
Components included:
2 – Uprights
2 – Legs
2 – Kindling Holders
Hard Glides
Rack Assembly:
1) Slip the floor glides over the end of the legs.
2) Align the two upright body pieces so the two kindling holders are at the same end.
3) Place the uprights on top and perpendicular to the legs. Using the Allen wrench and the four 3/8” x
5/8” button head screws, attach the legs and the uprights together. The screws should be inserted from
the top down toward the floor. Tighten the screws only finger tight.
4) Attach the two kindling holders to the uprights using the 3/8” x ½” button head screws
5) Square up your rack and tighten all the screws firmly.
6) All of our hammered steel racks are finished with an industrial wax designed to give years of protection
to the rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is
ever needed we recommend a “Pledge” like wax product.
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing injury
If you need help, please call 1-877-ENCLUME
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone [phone]  Fax [phone]
www.enclume.com
WARNING