Installation Guide

LR2n-Sling Rack
with Newspaper Holder
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly easier.
Components Included:
2- Rectangular pieces with pre-assembled kindling slings and newspaper holders
4- 3/8” x 5/8” button head screws
2- Legs
4- Hard glides
1-7/32” allen wrench
ASSEMBLY INSTRUCTIONS
1) Slip the floor glides over the ends of the legs.
2) Position the two rectangular body pieces over the legs so the base forms a square. Attach the pieces together with
the 3/8” x 5/8” button head screws. They should be inserted from the interior of the rack toward the floor.
Tighten all the screws only finger tight.
3) Square up the rack and tighten.
4) Use the kindling holder for kindling only. DO NOT stack logs in the kindling holder.
CARE INSTRUCTIONS
1) Your rack has been treated with a finish which will resist corrosion and tarnish. It may be cleaned with a damp
cloth and dried thoroughly. Please do not use abrasive cleaners.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy
shall be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within
the warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within
20 days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer
by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
WARNING
Thank you for choosing Enclume!
Enclume racks are the ultimate quality, design,
strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE ASSEMBLING
AND USING YOUR RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone]  Fax [phone]
www.enclume.com