Installation & Assembly

LOW CEILING RECTANGULAR RACK
PR13
If you need assistance, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Enclosed you will find everything needed for the assembly and use of your ceiling rack. Two people make assembly and installation
easier. The parts and hardware included are:
Hardware included:
4 – 3/8” x ½” Button Head Screw
6 – 2 1/2” Lag Screw
1 – 7/32” Hex Key
Components included:
1 – Rectangular Base
2 – Hanging Brackets
12 – Angled Pot Hooks
If you have also purchased a grid (may be sold
and packaged separately) you will also have received:
1 – Grid
6 – Pot Hooks
6 – Grid Brackets
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Grid Insertion (if you have not purchased a grid, please continue on th the rack assembly instructions)
1) Slip the 6 grid brackets over the rectangular base with the “L” portion pointing to the inside. Center one bracket on each end and
on the inside of each hanging bracket.
2) Place the grid on the brackets. You are now ready to assemble the rack.
3) Hang you pot hooks from interior squares only. Do not hang them from the perimeter or the cut portions of the grid. Distribute
your cookware evenly.
4) The grid has been treated with a finish which will resist corrosion and tarnish. It can be cleaned with a damp cloth and dried
thoroughly. Please do not use abrasive cleaners.
Rack Assembly
1) If your rack is plated, it is best to keep the tissue on during installation to avoid fingerprinting.
2) Using the four button head screws and the Allen wrench , attach the two hanging brackets to the outside of the rectangular base
and tighten securely. The assembly is now complete.
3) Your rack must be anchored into solid wood of ceiling joists or beams. Plasterboard or wall fasteners will not work and should
not be used. Carefully measure the area where the rack is to be hung and install with the lag screws. Your local hardware store
can advise you if special hardware is needed for your particular kitchen.
4) Distribute your cookware evenly around the rack.
WARNING: It is important that your ceiling rack is assembled correctly. If the unit is assembled or used incorrectly, it could become unstable and
collapse, possibly causing injury.
LIMITED WARRANTY: This product is warranted to be free of material defects, other than that from normal use, for a period of five years from the
date of purchase. Customer's exclusive remedy shall be the repair or replacement of the defective product and shall be subject to the following
conditions: (1) notice of any defect is received by Enclume within the warranty period and (2) customer returns the defective product to Enclume
Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20 days following a return authorization number (which may be
obtained by telephoning the number at the top of this instructions) being provided to the customer by Enclume. There are no other warranties,
expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY
DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.