User Manual

temperature and overrides the manual temperature settings and makes small adjustments

to the charging voltage.

If using lithium batteries, leave temp set to “NOR” (Normal) and leave temp sensor

disconnected.

Battery Temperature Compensation:

There are three manual battery temperature settings on the unit (‘Lo’, ‘nor’ and ‘hi’). See the

table below for voltage adjustments for temperature compensation.

Temperature Setting

Recommended

Battery Temperature

Battery Type

Voltage adjustment

from 25°C normal

setting

Low (Lo) < 5°C

GEL, Flooded + 0.675 V

AGM + 0.525 V

Normal (Nor) > 5°C and < 30°C

GEL, Flooded 0 V

AGM 0 V

High (HI) > 30°C

GEL, Flooded - 0.27 V

AGM - 0.21 V

Battery Temperature Sensor (BTS) Voltage Adjustment:

Battery Temperature

Battery Charging Voltage Adjustment from 25°C

Flooded and GEL type AGM type

< 25°C + 0.027V / °C + 0.021V / °C

25°C 0V 0V

> 25°C - 0.027 / °C - 0.021 / °C

Note: The above voltage compensation will only work with the supplied Battery Temperature Sensor tted which

will override the unit temperatures’ (Lo, Nor, Hi) setting. If using lithium batteries, leave temp setting “NOR“ (Normal)

and leave temp sensor disconnected.

Procedure To Set Or View Charger Setting

Follow the procedure or sequence in Appendix A1 and A2 (see back of this manual) to set

or view the charger setting.