User Manual

Appendix A3
VERSION: REV. 1.00 - June 2017
Press SEL to return to change current
CH1 PROGRAM
BULK VOLTAGE
CH1 PROGRAM
FLOAT VOLTAGE
Display shows Program & Bulk
Voltage as currently set.
Display shows the Float
voltage for Program.
Press SEL
to return to
change voltage
Press SEL
to return to
change voltage
Back to Appendix A1
Battery Type
Continues from
Appendix A2
CH1 Battery Type Menu
Press SEL
to change
battery type
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu Press SET to keep the current setting and toggle to the next menu
Press SEL
to enter
Voltage Menu
Press SEL
to enter
Voltage Menu
Press SEL to change voltage
(13.0V to 13.8V in 0.1V steps)
Press SEL to change voltage
(13.8V to 14.8V in 0.1V steps)
Charger conguration is a simple step by step process as shown below.
For Tech Support call Enerdrive on 1300 851 535
NOTE: The current setting below is based on the EN3DC40+ battery charger.
PROGRAM MODE