Brochure

ePOWER True Sine Wave Inverter with AC Transfer Switch
& Safety Switch
The ePOWER 2000W Inverter with AC Transfer & Safety Switch is one in a family
of aordable, high quality, professional level inverters by Enerdrive. By using
the latest power conversion technology, ePOWER inverters deliver clean and
energy ecient true sine wave AC power from your DC supply.
This ePOWER Inverter incorporates a 16A AC Transfer Switch which allows for
seamless AC power transfer between Mains/Generator and Inverter. This helps
to keep your appliances running with almost no break time on AC transfer and
allows for a much simpler installation on-board.
Also included in the unit is a RCD Safety Switch. This switch monitors the ow of
electricity through the inverter and detects any problems that may pose a risk
to personal safety and switches the output power o within 0.03 of a second.
The ePOWER 2000W is built to operate basic equipment such as power tools,
computers, microwave ovens, televisions and other appliances that use up to
2000W of power for operation. All Enerdrive ePOWER Inverters are covered by
our extensive 2-Year warranty.
Features:
▲
Seamless 16A AC Internal Transfer Switch
▲
AC RCD/Safety Switch with test button
▲
Removable LED Remote Control Display Panel
▲
Regulated Pure Sine Wave Output
▲
Silent Operation
▲
Compact Size for Easy Installation
▲
USB Port for charging USB devices
EN1120X
EN1120X-24V
EN1126X
Feed your inverter correctly
For your inverter to perform, you must
make sure you feed it correctly.
The right size DC input cables will help
do this. Sizing the correct input cables
is a critical requirement for maximum
performance from your inverter. An
inverter operates best if installed
less than 1.5meters from the battery
source.
Below is a chart with the correct DC
cable size required for the ePOWER
inverter range.
Part No Size mm² ≤ 1.5m
EN1104s 400w 10mm
EN1110s 1000w 35mm
EN1120s 2000w 70mm
EN1120x 2000w 70mm
EN1120x-24v 2000w 50mm
EN1126x 2600w 95mm