Brochure

Part Number: EN1210C
35mm Battery Cable Connection Kit with
In-Line Fuse & Holder. Suitable for Inverters
up to 1200watts.
Part Number: EN1220C
70mm Battery Cable Connection Kit with
In-Line Fuse & Holder. Suitable for Inverters
up to 2000watts.
Unit 11, 1029 Manly Road Tingalpa, Queensland, Australia 4173
Ph: 1300 851 535 | Email: [e-mail] | www.enerdrive.com.au
Specications: ePOWER True Sinewave Series
Inverter
ePOWER 400W
ePOWER 1000W
ePOWER 2000W
ePOWER 2000W with AC
Transfer Switch & Safety
Switch
ePOWER 24V 2000W with
AC Transfer Switch &
Safety Switch
ePOWER 2600W with AC
Transfer Switch & Safety
Switch
Part Number EN1104S EN1110S EN1120S EN1120X EN1120X-24V EN1126X
AC Output Power 400W 1000W 2000W 2000W 2000W 2600W
AC Output Current 1.74A 4.3A 8.7A 8.7A 8.7A 11.3A
AC Output Voltage 230 Vac / 50 Hz
AC Output Waveform True Sinewave (<3% THD)
AC Output Socket 1 outlet 1 outlet 2 outlets 2 outlets 2 outlets 2 outlets
Nominal DC Input Voltage 12.5 VDC
No Load battery draw < 0.8 A < 1.2 ADC < 1.2 ADC < 1.5 ADC
DC Input Voltage operating range 10.5 – 15.5 VDC 10.5 / 15.5 VDC 21.0 / 31.0 VDC 10.5 / 15.5 VDC
Under Voltage Alarm 11.2 VDC 11.0 / 12.1 VDC 22.0 / 24.2 VDC 11.0 / 12.1 VDC
Under Voltage Shutdown 10.5 VDC 10.5 / 11.8 VDC 21.0 / 23.6 VDC 10.5 / 11.8 VDC
Under Voltage Recovery 11.8 VDC 11.3 / 12.3 VDC 22.6 / 24.6 VDC 11.3 / 12.3 VDC
Over Voltage Shutdown 15.5 VDC 15.5 VDC 31.0 VDC 15.5 VDC
USB 5V, 1A 5V, 750 mA 5V, 750 mA
AC TRANSFER SWITCH
Transfer Time N/A < 30 ms
Transfer Relay Rating N/A 16A (resistive load)
AC Input socket IEC-C20 N/A 16A max
AC Output socket IEC-C19 N/A 16A max
AC Output Front GPO N/A 10A max
Safety and Environmental
Conformance All required Australian Standards , CE LVD: EN/IEC 62040-1, IEC61558-2-16
EMI / EMC N/A CE EMC: EN/IEC 62040-2 category C1
Agency Markings RCM , CE
Operating Temperature 0°C to 40°C
Storage Temperature -20°C to 60°C
Relative Humidity 5 - 90% noncondensing
Operating Altitude Up to 3000 meters above sea level
Display
Power Indicator Yes (Green) Yes (Green) Yes (Green) LED Display
Warning and Fault Indicator Yes (Red) Yes (Red) Yes (Red) LED Display
Weights and Dimensions
Weight 1.73kg 2.9kg 5.5kg 5.9 kg 5.9 kg 7.0 kg
Dimensions (W x L x H) 177 x 200 x 90mm 177 x 325 x 90mm 230 x 416 x 110mm 435 x 230 x 115 mm 560 x 230 x 115 mm
Warranty 2 years
Estimate Run Time On Load
Following run times are estimates for reference, based on using dierent battery bank sizes.
Actual run times may vary.
Estimate run time on dierent 12V Battery Bank Size
AC Load 60AH 120AH 180AH 240AH 300AH
50 W 11 hrs 22 hrs 33 hrs 44 hrs 55 hrs
100 W 5 hrs 11.5 hrs 17 hrs 23 hrs 29 hrs
200 W 2.5 hrs 5 hrs 8 hrs 11 hrs 13.5 hrs
500 W 49 mins 2 hrs 3 hrs 4 hrs 5 hrs
1000 W 15 mins 49 mins 1.5 hrs 2 hrs 2.5 hrs
1500 W 8 mins 27 mins 49 mins 1 hrs 1.5 hrs
2000 W N.R. 15 mins 34 mins 49 mins 1 hrs
2600 W N.R. 11 mins 25 mins 37 mins 49 mins
Important: Power Drain from DC Battery Bank.
Please note that AC transfer models have a power drain of approx 700mA from the battery bank
when the Inverter is running in AC By-Pass mode. In order to avoid draining down the battery
bank, a battery charger with sucient power is required to maintain the battery bank voltage.
Visit enerdrive.com.au for more information
ePOWER Inverters are available from your nearest Enerdrive dealer.
Find your local dealer by visiting: http://www.enerdrive.com.au/
where-to-buy-enerdrive-products/