Brochure

Model: EN31220 EN31240 EN31260 EN32430
CHARGER OUTPUT:
Output Current (Maximum) 20A 40A 60A 30A
OUTPUT VOLTAGE RANGE:
Charge 14.2 - 15.5 V 28.4 - 31.0V
Float 13.4 - 13.8 V 26.8 - 27.6V
Equalize 16.0 V 32.0V
Charging Control Four stages (Bulk/Absorption/Float/Maintenance)
Two stages (Bulk/Absorption)
Constant Power Supply (Program setting)
Priority Battery Bank Charging
DC Output Bank Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Standby Current < 2 mA
CHARGER INPUT:
AC Input Voltage (Nominal) 90 to 265 VAC
AC Input Operating Range
207-265 Vac (2.0 A Max)
90-125 Vac (3.8 A Max)
207-265 Vac (3.8 A Max)
90 - 125 Vac (7.7 A Max)
207-265 Vac (5.9 A Max)
90-125 Vac (11.3 A Max)
207-265 Vac (5.9 A Max)
90-125 Vac (11.3 A Max)
AC Input Frequency Range 47 - 63 Hz
Power Consumption 350W (Full Load) 700W (Full Load) 1050W (Full Load) 1050W (Full Load)
Power Factor Correction Yes
Charger Eciency > 82%
PROTECTION AND FEATURES:
Reverse Polarity Yes, (with user replaceable fuse/s)
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Yes, (with user replaceable fuse/s)
Cooling Forced air ventilation (thermo controlled fan)
Temperature Setting Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)
DISPLAY:
LCD Display (with back light) Charging status, Battery Voltage, Output Current & Fault Codes.
AC INPUT AND DC OUTPUT CONNECTION:
AC Input Connection IEC with Supplied 1.2M Power Lead
DC Output Connection Heavy Duty Terminal (3 banks) - Pan Heads 6mm Thread
DC Output Ground Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE:
Storage Range -40° to 70° C
Operating Range -20° to 60° C
Humidity 5-95%, relative humidity non-condensing
Ingress Protection IP32 (Basic drip proof in vertical orientation)
Base Unit Weight and Dimensions:
Weight: (kg) 2.4 2.6 4.0 4.0
Dimension: (mm) L x W x H 295 x 206 x 86 295 x 206 x 86 356 x 206 x 99 356 x 206 x 99
Optional Accessories: Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance: Complies with AS/NZS 60335.2.29 Including Australian deviations.
Handy User Manual And
Procedure Flow Chart App
206 mm
206 mm
86 mm
99 mm
295 mm
356 mm
12Volt / 20amp
12Volt / 40amp
12Volt / 60amp
24Volt / 30amp
12V 60A and 24V 30A
models run in parallel to
double your output.
*2 x 60amp 12V units = 120amp
*2 x 30amp 24V units = 60amp
Available Models
12Volt: 20amp - 40amp - 60amp - 120amp*
24Volt: 30amp - 60amp*
Remote Control Panel
Remotely control the
ePOWER battery charger
from your dash board or
other convenient locations.
Perfect for controlling fan
silent mode. Sold separately.
Available Accessories
Battery Temperature
Sensor
Included standard.
* Note: Parallel function available early 2014