User's Manual

Mounting The Charger
• Choose an appropriate mounting location.
•
For installing in an indoor location, the unit should be mounted vertically (with the
battery terminals facing downwards). This provides the best thermal performance and
drip protection. The unit should NOT be mounted upside down.
•
For installing in a boat or marine environment, the unit should only be mounted vertically
(Battery Terminals facing downwards only) to provide adequate drip protection.
•
Use the base of the charger as a mounting template to mark the positions of the xing
screws.
•
Drill the 4 xing holes and place the Charger in position and fasten the unit to the mounting
surface.
119mm 55mm
160mm
Enerdrive ePOWER DC2DC+ Battery Charger Owners Manual (Rev. 1.00)Page 14