User's Manual

Understanding The Function Key ‘MENU’, ‘SET’ And ‘SEL’ During
Charger Setting
CH1 - display is showing the charging battery
info (charging status, voltage and current).
CH2 or CH3 - When displayed symbol is solid
this means the power is coming from the related
channel and the other channel will be ashing if
it is connected but not charging.
“V“ - Display is showing the voltage
“A“ - display is showing the current
“Auto“ - units Silent mode is switched on
“Priority“ - the units “ignition Sense” terminal
is connected or the unit is set to Manual Override
mode
“Mode“ - charging mode setting*
“Temp“ - Temperature setting*
*Will only display when selected setting is active
Digital Display:
• During the charging process, the display shows ‘CH1’ charging status, voltage and current
repeatedly, and ‘CH2’ or ‘CH3’ symbol is solid to indicate the active input source. If the other
input channel is available and the voltage is above the ‘CH2 and CH3 Flashing Voltage’ the
icon will be ashing. When the menu button is pressed once, the display will change to
show CH1 Voltage for 3 seconds, CH2 voltage for 3 seconds and CH3 voltage for 3 seconds.
The display will then revert back to normal operation and will show the CH1 info.
•
When the Battery (CH1) is fully charged, it will show ‘CH1’ and ‘FLO’, voltage and current
repeatedly on the display.
•
The selected “battery type” icon is always ON at all times during the whole charging process.
• The ‘Priority’ Icon turns ON when the “ignition sense” terminal is connected or the unit is
set to ‘Manual Override’ mode.
Priority
Enerdrive ePOWER DC2DC+ Battery Charger Owners Manual (Rev. 1.00)Page 26