User's Manual

8. SPECIFICATIONS
Output Rating
Output Voltage 12V Nominal (8.0V min)
Output Current 40A ~ 50A
Output Power 775W
Charger DC Output (CH1):
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range 13.8V – 15.5V
Float Voltage Range 13.0V – 13.8V
Charger Current (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalize Voltage (Flooded Battery) 15.5V
Equalize Charging Current 10% of Bulk Current Setting
Charging Control
2 stage / 3 stage selectable
(Default 3 stage)
DC Output Bank Single
Current draw from CH1 when not operating = < 50mA
Battery Temperature Setting
Low/ Normal/ High
(Battery Temperature Sensor Standard)
Eciency 95%
INPUT Rating (CH2 - MPPT Solar)
Input Voltage 14.5 - 45VOC
Maximum Solar Input
≤ 23V input, 500W (600W allowable)
≥37.5V-45V input, 750W (800W allowable)
INPUT Rating (CH3 - Start/Alternator)
Input Voltage 10.5 - 16VDC / 21 - 32VDC
Dimensions
Height x Width x Depth 242mm x 172mm x 74mm
Unit Weight 1.85 Kg
Shipping Weight 2.17 kg
Note: Specications are subject to change without notice.
Enerdrive ePOWER DC2DC+ Battery Charger Owners Manual (Rev. 1.00)Page 34