Instructions / Assembly

P a g e | 3
2. This heater is not intended for use in bathrooms, laundry areas or similar indoor locations where there may be
moisture. Never place heater where it may fall into a pool, bathtub or other water receptacle.
3. This unit is intended for household use only. DO NOT use the unit in such areas as construction sites, greenhouses,
barns or stables or any place that has flammable materials.
4. DO NOT use the unit in an unventilated area.
5. A heater has hot, arcing and sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are
used or stored.
6. DO NOT move the unit when it is still connected to an electrical outlet and always wait for the unit to cool down before
moving, cleaning and storing.
7. DO NOT touch the heater when in use. Please wait at least 10 minutes before touching it.
8. Extreme caution is necessary when any heater is used near a child or someone physically disabled.
9. DO NOT LEAVE THE UNIT UNATTENDED WHEN IN OPERATION.
10. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles (not provided)
when moving this heater, Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at
least 1 meter (3 feet) from the front of the heater.
11. DO NOT cover the unit with any type of cloth while in operation or a short time after turning the unit off.
12. DO NOT wrap the power cord around the unit.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening of the unit as this may cause electric
shock, fire or damage to the heater.
14. PLEASE HANDLE THE UNIT WITH CARE.
15. DO NOT operate the heater with a damaged power cord or an AC wall outlet. DO NOT operate the heater if it has
been dropped or damaged in any manner.
16. DO NOT USE THE UNIT AS A ROOM HEATER.
17. Do not run the power cord under carpeting; do not cover the cord with throw rugs, runners or the like. Arrange cord
away from traffic area where it may be tripped over.
18. To disconnect heater, turn the power switch to off, then unplug the unit.
19. To prevent possible fire, do not block air intakes or exhaust openings in any manner. Do not use on soft surfaces, like
a bed, where openings may become blocked.
20. Use this heater only as described in this manual; any other use not recommended by the manufacturer may cause
fire, electric shock or injury to persons.
SAVE THESE INSTRUCTIONS
5. CLEANING AND STORAGE
1. Turn the unit OFF and unplug the unit before cleaning.
2. Use only a soft cloth to clean the exterior. An air compressor or a vacuum cleaner can be used to clean the
interior.
3. Do not use gasoline, paint thinner or other chemicals to clean the heater
4. Store the heater in its original box and store in a cool, dry place.
6. SPECIFICATIONS
Power supply: 120V / 60Hz
Wattage: 700, 800, 1500Watts
Net weight: 2.5 kg
Gross weight (with carton): 3.5 kg
7. GROUNDING INSTRUCTIONS
This product is for use on a nominal 120V circuit with a grounding plug that looks like the plug illustrated below. Make
sure that the product is connected to an outlet having the same configuration as the plug. If you use an extension cord,
make sure it also has a grounding plug. No adaptor should be used with this product.