JUMP STARTER + WIRELESS CHARGER 12V CAR JUMP STARTER & PORTABLE POWER BANK WITH WIRELESS CHARGING 4010229 INSTRUCTI ON MANUAL model no.
model no. KRJ1000 | contact us 1-866-295-6775 SAFETY INFORMATION WARNING Always wear safety glasses when jump starting a battery, and gloves when handling a battery. When jump starting a vehicle please ensure that the clamp connection is securely fitted into the jump starter socket. Ensure the battery clamps are connected correctly, and the connectors are free from rust and dirt. Do not allow this product to become wet. Do not immerse the product in water.
TO CHARGE YOUR JUMP STARTER In the Car: 1. Plug the car adaptor into the socket of cigarette lighter. 2. Attach the DC plug into the USB-C port on the Power Bank with the equipped USB-A to USB-C cable. TO POWER YOUR MOBILE DEVICES Use the original manufacturer's USB cable that came with your device and plug it into the USB output ports. The USB charging port can charge at 5V/2A, 9V/2A or 12V/2A compatible Quick Charge technology devices or charges non–Quick Charge devices at up to 2.4A.
model no. KRJ1000 | contact us 1-866-295-6775 PACKAGE CONTENTS PACKAGE CONTENTS 1 Portable charger/wireless 4 Jumper cable charger 2 USB-A to USB-C cable 3 Car DC charger 2 J UM P S TAR TE R + WI RE LE SS CHARG E R 1 4 3 PRODUCT SPECIFICATION Product Dimensions: 5.35 x 2.99 x 0.98 inch (136 x 76 x 25 mm) Product Weight: 0.68 lbs (310g) Multi-function Jump Starter DĂ©marreur Batterie Multifonction Cap.: 7,200mAh Input (TypeC): 5V/2.4A, 9V/2A Output: QC3.
FUNCTIONALITIES A Power & LED light button B USB output port E Battery level indicator F Wireless charging surface G Battery clamps with cross polarity protection C Jumpstarter connection port D Input (TypeC): 5V/2.
model no. KRJ1000 | contact us 1-866-295-6775 JUMP STARTING IN ORDER TO JUMP START THE AUTOMOBILE BATTERY, FOLLOW THESE INSTRUCTIONS Jumper cables have designated colors, RED for POSITIVE (+) and BLACK for NEGATIVE (-). DO NOT allow the metal ends to touch together, this may harm the battery, charging system and/or electronics in the vehicle. 4. Fasten the BLACK jumper cable to the NEGATIVE (-) post on the car battery.The NEGATIVE will be marked with a MINUS (-) sign.
8. TO USE A FLASHLIGHT Press the power button for 3 seconds to start the LED illumination. You can then select from 2 modes (On/SOS) by pressing the power button lightly in sequence. Keep the engine running 20 to 30 minutes, or drive the car to recharge the battery.
WIRELESS CHARGER model no. KRJ1000 | contact us 1-866-295-6775 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
WARRANTY AND RETURNS model no. KRJ1000 | contact us 1-866-295-6775 WARRANTY AND RETURNS IF ANY PARTS ARE MISSING OR DAMAGED, OR IF YOU HAVE ANY QUESTIONS, PLEASE CALL OUR TOLL-FREE HELPLINE AT 1-866-295-6775 Read and understand this instruction manual thoroughly before using the product. It contains important information for your safety as well as operating and maintenance advice. Keep this instruction manual for future use.
NOTES 10