User guide

Distribute the load evenly across the entire saddle surface.
Always use a saddle to protect the plunger.
IMPORTANT: Hydraulic equipment must only be serviced by a
qualified hydraulic technician. For repair service, contact the
Authorized ENERPAC Service Center in your area. To protect
your warranty, use only ENERPAC oil.
WARNING: Immediately replace worn or damaged parts by
genuine ENERPAC parts. Standard grade parts will break
causing personal injury and property damage. ENERPAC parts
are designed to fit properly and withstand high loads.
PUMP
V-161
SEQUENCE VALVE
GAUGE
MAIN CYLINDER
(Circuit 1)
SECONDARY CYLINDER
(Circuit 2)
GAUGE
"CYL." PORT
SEQUENCING VALVE, V-161
a. Connect valve as shown, plumbing "cyl." port to sequenced
cylinder.
b. Adjust Sequence Valve to desired sequencing pressure. Turn
sequence valve handle clockwise to increase pressure, or
counterclockwise to decrease pressure.
VALVE OPERATION (Example)
With sequence valve set at desired pressure (500 psi), close valve
on pump. The main cylinder will extend and the pressure will raise to
the desired sequence pressure (500 psi). The sequence valve will
then open at which point the pressure to both cylinders will increase
until the valve on the pump is returned to neutral, or until system
relief pressure is reached. (Note: the secondary cylinder pressure
will be 500 psi less than main cylinder.) Open valve on pump and
return system pressure to zero. Both cylinders will now retract.
DO NOT use excessive closing torque on valve handle or use any
handle extension. This will cause unnecessary wear on valve stem
and seat and may damage the spring.
Valve handle can be removed (loosen cap screw at end of handle)
to reduce tampering with valve settings. When handles are
reassembled on valve stem, make sure the cap screw is contacting
flat on the stem and the cap screw is tightened securely.
PROTECT YOUR WARRANTY, USE ONLY ENERPAC
HYDRAULIC OIL.
Enerpac Worldwide Locations
e-mail: info@enerpac.com
internet: www.enerpac.com
All Enerpac products are guaranteed against defects in workmanship and materials for as long as you own them.For your nearest authorized Enerpac Service Center, visit us at www.enerpac.com
Africa
ENERPAC Middle East FZE
P.O. Box 18004
Jebel Ali, Dubai
United Arab Emirates
Tel: +971 (0)4 8872686
Fax: +971 (0)4 8872687
Australia
ENERPAC, Applied Power Australia
Ltd.
Block V Unit 3, Regents Park Estate
391 Park Road
Regents Park NSW 2143
(P.O. Box 261) Australia
Tel: +61 297 438 988
Fax: +61 297 438 648
Brazil
Power Packer do Brasil Ltda.
Rua dos Inocentes, 587
04764-050 - Sao Paulo (SP)
Tel: +55 11 5687 2211
Fax: +55 11 5686 5583
Toll Free in Brazil:
Tel: 0800 891 5770
vendasbrasil@enerpac.com
Canada
Actuant Canada Corporation
6615 Ordan Drive, Unit 14-15
Mississauga, Ontario L5T 1X2
Tel: +1 905 564 5749
Fax: +1 905 564 0305
Toll Free:
Tel: +1 800 268 4987
Fax: +1 800 461 2456
Technical Inquiries:
techservices@enerpac.com
China
Actuant China Ltd.
1F, 269 Fute N. Road
Waigaoqiao Free Trade Zone
Pudong New District
Shanghai, 200 131 China
Tel: +86 21 5866 9099
Fax: +86 21 5866 7156
Actuant China Ltd. (Beijing)
709A Xin No. 2
Diyang Building
Dong San Huan North Rd.
Beijing City, 100028 China
Tel: +86 10 845 36166
Fax: +86 10 845 36220
Central and Eastern Europe
ENERPAC B.V.
Storkstraat 25
P.O. Box 269, 3900 AG Veenendaal
The Netherlands
Tel: +31 318 535 936
Fax: +31 318 535 951
France
ENERPAC Une division de
ACTUANT s.a.
B.P. 200
Parc d’Activités
du Moulin de Massy
F-91882 Massy CEDEX France
Tel: +33 1 601 368 68
Fax: +33 1 692 037 50
Germany, Austria, Switzerland,
Russia and CIS (excl. Caspian Sea
Countries) ENERPAC
Applied Power GmbH
P.O. Box 300113
D-40401 Düsseldorf
Germany
Tel: +49 211 471 490
Fax: +49 211 471 49 28
India
ENERPAC Hydraulics (India) Pvt. Ltd.
Plot No. A/571
MIDC, TTC Industrial Area
Mahape-400 701
Navi Mumbai, India
Tel: +91 22 2778 1472
Fax: +91 22 2778 1473
Italy
ENERPAC S.p.A.
Via Canova 4
20094 Corsico (Milano)
Tel: +39 02 4861 111
Fax: +39 02 4860 1288
Japan
Applied Power Japan Ltd.
1-1-11, Shimomae
Toda-shi
Saitama Pref.
Japan 335-0016
Tel: +81 484 30 1055
Fax: +81 484 30 1066
The Netherlands, Belgium,
Luxembourg, Sweden, Denmark,
Norway, Finland
ENERPAC B.V.
Storkstraat 25
P.O. Box 269, 3900 AG Veenendaal
The Netherlands
Tel: +31 318 535 911
Fax: +31 318 525 613
+31 318 535 848
Technical Inquiries Europe:
techsupport.europe@enerpac.com
Singapore
Enerpac Asia Pte. Ltd.
25 Serangoon North Ave. 5
#03-01 Keppel Digihub
Singapore 554914
Thomson Road
P. O. Box 114
Singapore 915704
Tel: +65 64 84 5108
+65 64 84 3737
Fax: +65 64 84 5669
Technical Inquiries:
chee@actuant.com.sg
South Korea
Actuant Korea Ltd.
3Ba 717, Shihwa Industrial
Complex, Jungwang-Dong,
Shihung-Shi, Kyunggi-Do
Republic of Korea 429-450
Tel: +82 31 434 4506
Fax: +82 31 434 4507
Spain, Portugal
ENERPAC
C/San José Artesano 8
Pol. Ind.
28108 Alcobendas
(Madrid) Spain
Tel: +34 91 661 11 25
Fax: +34 91 661 47 89
Middle East, Turkey ,
Caspian Sea, Greece
ENERPAC Middle East FZE
P.O. Box 18004
Jebel Ali, Dubai
United Arab Emirates
Tel: +971 (0)4 8872686
Fax: +971 (0)4 8872687
United Kingdom, Ireland
ENERPAC Ltd., P.O. Box 33
New Romney, TN28 8QF
United Kingdom
Tel: +44 01797 363 639
Fax: +44 01527 585 500
USA, Latin America
and Caribbean
ENERPAC
P. O. Box 3241
6100 N. Baker Road
Milwaukee, WI 53209 USA
Tel: +1 262 781 6600
Fax: +1 262 783 9562
User inquiries:
+1 800 433 2766
Distributor inquiries/orders:
+1 800 558 0530
Technical Inquiries:
techservices@enerpac.com