Hydraulic Pumps and Directional Valves Enerpac hydraulic pumps are available in over 1000 different configurations. Whatever your high-pressure pump needs are... speed, control, intermittent or heavy duty cycle you will find an Enerpac pump suited to the application. Featuring Hand, Battery, Electric, Air and Gasoline powered models, with multiple reservoir and valve configurations, Enerpac offers the most comprehensive pump line available.
Pumps and Directional Valves Section Overview Power Source Pump Types Lightweight Hand Pumps Maximum Reservoir Capacity (litres) Max.
P-Series, Lightweight Hand Pumps ▼ Shown from top to bottom: P-802, P-842, P-202, P-142 Exclusively from Enerpac Cylinder Matching Chart For help in selecting the correct hand pump for your application, please refer to the Cylinder Matching Chart located in the ‘Yellow Pages’. 248 Page: Speed Chart To determine how a specific pump will operate your cylinder, see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Lightweight Hand Pumps P Pump-Cylinder Sets Series All pumps marked with an * are available as sets (pump, cylinder, gauge, couplers and hose) for your ordering convenience. 58 Page: Reservoir Capacity: 327 - 2540 cm3 Release valve Flow at Rated Pressure: 0,90 - 2,47 cm3/stroke Operating Pressure: 700 bar Hoses Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
P-Series, ULTIMA Steel Hand Pumps ▼ Shown from left to right: P-77, P-80, P-84, P-801, P-39 The Solution for Tough Jobs Two Speed Pumps Recommended for applications where cylinder plunger must advance rapidly to load contact, and applications where greater oil capacities are required, such as multiple cylinder hook-ups. Foot Pump Conversion Kits Convert your P-39, P-77, P-80 or P-801 to foot power with the PC-11 Kit. Includes instructions for easy conversion.
ULTIMA Steel Hand Pumps P Series Reservoir Capacity: 770 - 7423 cm3 Flow at Rated Pressure: 2,46 - 4,75 cm3/stroke Maximum Operating Pressure: 700 bar Extra Capacity Hand Pumps P-39, P-77 P-84 only P-462 and P-464 feature extra large reservoirs and high first-stage flow rate. These pumps are ideally suited for powering high-capacity cylinders. Pump-Cylinder Sets P-80, P-801, P-84 The P-80 is also available as set (pump, cylinder, gauge, couplers and hose) for your ordering convenience.
P-Series, Low Pressure Hand Pumps ▼ Shown from left to right: P-25, P-51, P-18 When Less Than 700 Bar is All You Need Gauges Minimize the risk of over loading and ensure long, dependable service from your equipment. Refer to the System Components section for a full range of gauges.
Low Pressure Hand Pumps P Series Reservoir Capacity: 360 - 3277 cm3 Flow at Rated Pressure: 2,46 - 9,50 cm3/stroke Maximum Operating Pressure: 175 - 350 bar MP-Series Multifluid Hand Pumps P-18 Corrosion resistant hand pumps for low pressure filling and high pressure testing applications, suitable for a wide range of fluids. Page: 68 ▼ P-51 hand pumps used with RC-series cylinders to keep wooden layers under pressure during lamination of plates.
MP-Series, Multifluid Hand Pumps ▼ Shown: MP-110 MP Series Flow at Rated Pressure: 2,2 - 21,8 cm3/stroke Maximum Operating Pressure: 110 - 1000 bar Multifluid Pump Applications • • • • Filling and testing of aircraft systems as shock absorbers Testing of aircraft systems using Skydrol fluid Testing of pressure vessels Operation of single-acting hydraulic tools and cylinders.
Lightweight Hydraulic Foot Pump ▼ Shown: P-392FP P Series Reservoir Capacity: 492 cm3 Flow at Rated Pressure: 2,47 cm3/stroke Maximum Operating Pressure: 700 bar Pump-Cylinder Sets The P-392FP is available as set (pump, cylinder, gauge, couplers and hose) for your ordering convenience.
Ultra-High Pressure Hand Pumps ▼ Shown from left to right: 11-100, P-2282 Ultra-High Pressure up to 2800 bar 2-Way Shut-Off Valve Model Nr. 72-750 For 2800 bar applications requiring a shut-off valve or gauge snubber. Made of 318 Stainless Steel and utilizing .38 inch cone fittings, it is the perfect selection for use with your ultra-high pressure hand pump.
Ultra-High Pressure Hand Pumps ▼ Optional Ultra-High Pressure Fittings and Tubings Description Connection P 11 Model Nr. 2800 bar Gland Nut Plug .38" cone 43-001 Elbow .38" cone 43-200 Tee .38" cone 43-300 Gauge Tee .38" cone side/ .25" cone gauge port 43-301 Series Reservoir Capacity: 737 - 983 cm3 Flow at Rated Pressure: 0,61 - 2,49 cm3/stroke Maximum Operating Pressure: Gauge Adaptor .38" cone side/ .25" cone gauge port 700 - 2800 bar 83-011 Coupling .38" cone 43-400 Cross .
XC-Series, Cordless Hydraulic Pumps ▼ Shown: XC-1201ME Performance of a Powered Pump Portability of a Hand Pump G2535L Gauge Use gauge to check system pressure. Use gauge adaptor GA-3 for easy mounting.
Cordless Hydraulic Pumps XC-Series Cordless Hydraulic Pumps The XC-Series cordless pump is ideal for jobs using small to medium size cylinders and hydraulic tools, and is compatible with over 140 Enerpac tools and cylinders. These cordless pumps combine the performance of a powered pump with the portability of a hand pump making them a perfect solution for remote applications with limited or no access to a power supply or for locations where corded solutions present trip hazards.
PU-Series, Economy Electric Pumps ▼ Shown: PUJ-1200E Heavy on Performance, Light on Weight Gauges Minimize the risk of overloading and ensure long, dependable service from your equipment. For use with the Economy pump the G-2535L gauge and GA-3 gauge adaptor are suggested. For a full range of gauges, please refer to the System Components section.
Economy Electric Pumps About the Economy Pump The Economy pump is best suited to power small to medium size cylinders or hydraulic tools. Its lightweight and compact design make it ideal for applications which require easy transport of the pump. The universal motor works well on long extension cords or generator-driven electrical power supplies. For further application assistance refer to the ‘Yellow Pages’.
PE-Series, Submerged Electric Pumps ▼ Shown: PEJ-1401E Best Performance for Mid-Range Cylinders and Tools ▼ SELECTION CHART For more technical information see next page. 5 BASIC PUMP TYPES Select the model that suits your application. For special requirements see page 79 or contact your Enerpac office.
Submerged Electric Pumps PE PE-Series Submerged Pump Application The Submerged pump is best suited to power small to medium size cylinders or hydraulic tools, or whenever quiet, intermittent duty cycle is needed. With its low sound level and the addition of the optional oil cooler, the Submerged pump is suited to light production work as well. Its lightweight and compact design also make it ideal for applications which require some transport of the pump.
PE-Series, Submerged Electric Pumps ◀ For full features see previous page. OIL FLOW VERSUS PRESSURE Pressure Rating (bar) Output Flow Rate at 50 Hz (l/min) 1st stage 2nd stage 1st stage 2nd stage (kW) 0,37 70 700 2,0 0,27 Motor Electrical Specifications * Sound Level Relief Valve Adjustment Range (Amps @ Volts-Ph-Hz) (dBA) (bar) 13 @ 115-1-50/60 62-70 6,75 @ 230-1-50/60 70-700 Oil Flow (l/min) ▶ SUBMERGED PUMP PERFORMANCE Motor Size * At full load.
Submerged Electric Pumps CUSTOM BUILD YOUR SUBMERGED PUMP If the Submerged Pump that would best fit your application cannot be found in the chart on page 77, here you can easily build your custom submerged pump.
Z-Class Enerpac Power Pumps Introducing the Z-Class power pumps from Enerpac – pumps that run cooler, use less electricity and are easy to service. Enerpac has used the latest metallurgical, bearing and seal technologies to produce a pump whose features and benefits far surpass the electric pumps that are available today.
Z-Class, An Innovation in Pump Design Z-Class Pumping Element – The Heart of Your Hydraulic System Highly efficient design provides increased flow rates, reduced heat generation and a decrease in power consumption. This means improved tool speed and increased service life – which results in higher productivity and lower operating costs. Heavy-duty bearings extend pump life by reducing friction, reducing surface-loading and lowering bearing stresses.
ZU4-Series, Portable Electric Pumps ▼ Shown from left to right: ZU4304ME, ZU4420SE-H, ZU4304PE-K Tough. Dependable. Innovative. ZU4-Series Features and Options For special requirements see factory installed features and options.
ZU4-Series, Electric Pumps Patented Z-Class pump technology provides high by-pass pressures for increased productivity – important in applications using long hose runs and high pressure-drop circuits, like heavy lifting or certain double-acting tools. • For applications that do not require digital display features of the Premium Pump. Available in all manual or jog versions.
ZU4-Series, Options & Accessories Hoses Enerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only Enerpac hydraulic hoses.
ZU4-Series, Options & Accessories ZU4-Series Options • Classic Electric, • Standard (STD) Electric (no LCD) • Pro Electric (with LCD). Refer to page 87 for ordering matrix. Accessory Kits can be installed by the customer.
ZU4, Specifications and Dimensions Oil flow (l/min) ▶ OIL FLOW VERSUS PRESSURE Pressure (bar) ▶ ZU4-SERIES PERFORMANCE CHART Motor Size Output Flow Rate at 50 Hz (l/min) Motor Electrical Specifications Sound Level Relief Valve Adjustment Range (dBA) (bar) (kW) 7 bar 50 bar 350 bar 700 bar (Volts-Ph-Hz) 1,25 11,5 8,8 1,2 1,0 115-1-50/60 230-1-50/60 85-90 140-700 ⅜"-18 NPTF Advance and Retract Ports ① User adjustable relief valve ② Oil fill port SAE #10 ⅞"-14 UNF-2B ③ Oil level sight ga
ZU4-Series, Pump Ordering Matrix CUSTOM BUILD YOUR ZU4-SERIES PUMP If the ZU4-Series pump that would best fit your application cannot be found in the chart on page 83, you can easily build your custom ZU4-Series pump here.
ZE-Series, Electric Pumps ▼ Shown from left to right: ZE3304ME-K, ZE4110DE-FHR Tough. Dependable. Innovative. The New Standard for Industrial Applications Oil Level Glass All ZE-Series pumps have an oil sight glass and steel reservoirs. Full sight oil level glass on 10, 20 and 40 litres reservoirs, oil level indicators on 4 and 8 litres reservoirs. Pump Type For options and other model numbers see ordering matrix or contact your Enerpac office.
ZE-Series, Electric Pumps • High-efficiency pump design – higher oil flow and by-pass pressure • High-strength, moulded electrical box protects electronics, power supplies and LCD readout and stands up to harsh industrial environments • IP54 protection and isolation class • Back-lit LCD provides self test, diagnostic and read-out capabilities never before offered on an industrial pump (included on pump with electric valves, optional on other models) • Totally enclosed, fan-cooled industrial electric motors
ZE-Series, Options & Accessories Electric Box 1) Level/Temperature Switch 4) Return Line Filter • Back-lit LCD • Pump usage information, hour and cycle counts • Low-voltage warning and recording • Self-test and diagnostic capabilities • Pressure read-out 2) • Auto-mode pressure setting 2) • Information can be displayed in six languages 3) • Shuts down pump before oil level reaches an unsafe level, avoiding damage due to cavitation • Shuts down pump when unsafe oil temperature is reached • Ideal if pump
ZE-Series, Options & Accessories Options Accessory Kits can be installed by customer. See chart below for options on Standard Electric (without electric box) or LCD Electric (with electric box). Refer to page 93 for ordering matrix. ZE-Series Options Factory Installed Accessory Kits Std. LCD Std. LCD Electr. Electr. Electr. Electr.
ZE-Series, Specifications & Dimensions Single-stage Oil Flow (l/min) ▶ Oil Flow (l/min) ▶ Oil Flow (l/min) ▶ Oil Flow (l/min) ▶ Two-stage Pressure (bar) ▶ Pressure (bar) ▶ Pressure (bar) ▶ Pressure (bar) ▶ ▼ ZE-SERIES PERFORMANCE CHART Pump Series Output Flow Rate at 50 Hz * (l/min) low pressure at at 7 bar 50 bar ZE3 ZE4 ZE5 ZE6 0,59 6,15 0,87 8,88 1,75 11,61 3,00 12,29 0,59 5,26 0,87 8,20 1,72 11,27 2,94 12,15 Pump Unit high pressure at at 350 bar 700 bar 0,57 0,57 0,84 0,84 1,68 1,68 2,86
ZE-Series, Pump Ordering Matrix ▼ This is how ZE-Series pump model numbers are built up: Z E 4 1 10 D W - F H L T 1 2 Product Motor Type Type 3 Flow Group 4 Valve Type 1 Product Type Z 5 6 7 Reser Valve Motor voir Operation Voltage Size = Pump Class 2 Prime Mover E = Induction electric motor 3 Flow Group 3 4 5 1) 6 1) = = = = 0,55 l/min @ 700 bar (0,75 kW) 0,82 l/min @ 700 bar (1,12 kW) 1,64 l/min @ 700 bar (2,24 kW) 2,73 l/min @ 700 bar (5,60 kW) 4 Valve Type 0 1 2 3 6 Valve Operation D =
SFP-Series, 700 bar Split Flow Pumps ▼ SFP 421SW and SFP 404SW Multiple Outlets with Equal Oil Flow Typical Split Flow Pump Applications For lifting applications on multiple points Split-Flow Pumps are a far better alternative than using separate operated pumps. Where synchronization of maximum 4% is acceptable and load is even distributed over the lifting points, split flow pumps are a safe and economical solution.
700 bar Split Flow Hydraulic Pumps SFP Series MP A B MP A B B 900 MP A B 845 MP A Reservoir Capacity: 40 - 150 litres Split Flow Outlets: 2, 4 and 6 outlets 660 900 Flow at Rated Pressure: 0,45 - 4,20 l/min SFP-Series with 40 litres reservoir (shown with 4 split flow outlets) Maximum Operating Pressure: 700 bar 1322 1250 MA P MA P MA P ① ② ③ ④ ⑤ ⑥ ⑦ MA P Manifold with split flow outlets and CR-400 couplers Adjustable pressure relief valve per circuit Manual 4/3 control valves
XA-Series, Air Driven Hydraulic Foot Pumps ▼ Shown: XA 11G Productivity & Ergonomics Optional Pressure Gauge Integrated gauge with calibrated scale reading in bar, psi and MPa for actual pressure reading. 4/3 Control Valve For powering double-acting hydraulic cylinders and tools. • Ergonomic design for less operator fatigue 2 Litres Reservoir • Variable oil flow & fine metering for precise control Double oil capacity for powering larger hydraulic cylinders and tools.
XVARI® Technology, Air Driven Hydraulic Foot Pumps XA Series Reservoir Capacity: 1,0 - 2,0 litres Flow at Rated Pressure: ▼ XA-SERIES PERFORMANCE CHART Maximum Pressure Output Flow Rate (l/min) (bar) No load Load 700 2,0 0,25 Pump Series Valve Function Dynamic Air Pressure (bar) XA 1 Air Consumption: 283 - 991 l/min Maximum Operating Pressure: 2,1 - 8,6 Advance / Hold / Retract 0,25 l/min 700 bar OIL FLOW VERSUS PRESSURE 3/8"-18 NPTF Oil outlet 1/4"-18 NPTF Air inlet 4/3 Optional contr
PA-Series, Turbo II Air Hydraulic Pumps ▼ Shown from top to bottom: PAMG-1402N, PARG-1102N, PATG-1102N, PATG-1105N Compact Air Over Hydraulic Regulator-Filter-Lubricator Recommended for use with all Turbo air pumps. Provides clean, lubricated air and allows for air pressure adjustment. Steel bowl guards are standard. Model Number RFL-102 Large Reservoir Models The Turbo II Air Pump is also available with an enlarged reservoir: PATG-1105N, PAMG-1405N and PARG-1105N.
PA-Series, Turbo II Air Hydraulic Pumps OIL FLOW VERSUS PRESSURE PATG-models use a foot or hand operated treadle to control air and valve functions. PATG PAMG PARG Oil flow (l/min) ▶ at 6,9 bar dynamic air pressure PAMG-models use a treadle with a locking feature to control air, and a 4-way manual valve to control hydraulics. Series Reservoir Capacity: PARG-models use air pendant for remote control.
PA-Series, Air Hydraulic Foot Pumps ▼ Shown: PA-1150, PA-133 PA Series Reservoir Capacity: 0,6 - 1,3 litres Flow at Rated Pressure: 0,13 l/min Air Consumption: 255 l/min Maximum Operating Pressure: 700 bar Reservoir Conversion Kit ouble the reservoir D capacity of your existing PA-133 with this easy to install conversion kit.
PAM-Series, Air Hydraulic Pumps ▼ Shown: PAM-1041 PAM Series Reservoir Capacity: 4,0 - 8,0 litres Flow at Rated Pressure: 0,15 l/min Air Consumption: 510 l/min Maximum Operating Pressure: 700 bar Locking Valves Pumps with 4/3 manual valves are available with 4/3 manual locking valves instead. Add suffix “L” to pump model number.
ZA4-Series, Modular Air Hydraulic Pumps ▼ Shown: ZA4208MX, ZA4420MX Tough Dependable Innovative ATEX 95 Certified The Enerpac ZA4-series air pumps are tested and certified according to the Equipment Directive 94 / 9 / EC “ATEX Directive” for equipment and protective systems intended for use in potentially explosive atmospheres.
Modulair Air Hydraulic Pumps ZA4 ▼ This is how a ZA4-Series pump model number is built up: Z A 4 2 08 M X - F H R 3 Flow Group 4 Valve Type 5 6 7 Reservoir Valve Motor Size Operation Voltage 1 Product Type Z = Pump Class Series 8 Options 6 Valve Operation M = Manual valve N = No valve 2 Prime Mover A = Air motor Reservoir Capacity: 4 - 40 litres 7 Motor Voltage X = Not applicable 3 Flow Group 4 = 1,3 l/min @ 700 bar 8 Options F = Return Line Filter G = 1000 bar gauge H = Heat exchanger (on 4
ZG5-Series, Gasoline Hydraulic Pumps ▼ Shown: ZG5420MX-R Tough, Dependable, Innovative Speed Chart To determine how a specific pump will operate your cylinder, see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’. Page: 255 ZG-Series, Gasoline Pump Performance • Features Z-Class high efficiency pump design, higher oil flow and bypass pressure • Two-speed operation reduces cycle time for improved productivity • User adjustable relief valve built-in on manual valves.
Gasoline Hydraulic Pumps ▼ This is how a ZG-Series pump model number is built up: Z G 5 4 10 M X - F R 1 2 Product Motor Type Type 3 Flow Group 4 Valve Type 5 6 7 Reservoir Valve Motor Size Operation Voltage 1 Product Type Z = Pump Class 2 Prime Mover G = Gasoline Engine 3 Flow Group 5 = 1,6 l/min @ 700 bar 6 = 3,3 l/min @ 700 bar (see page 106) 4 Valve Type 0 = No valve, with cover plate 1) 2 = 3/2 manual valve VM32 3 = 3/3 manual valve VM33 4 = 4/3 manual valve VM43 6 = 3/3 manual locking valve
Gasoline Hydraulic Pump ▼ Shown: ZG6440MX-BCFH ZG6 Series Reservoir Capacity: 40 litres Flow at Rated Pressure: 3,3 l/min Engine Size: 9,7 kW Maximum Operating Pressure: 700 bar Tough Dependable Innovative • Features Z-Class high efficiency pump design: – higher oil flow and bypass pressure – patented balanced rotating pump components to reduce vibration – replaceable piston check valves that increase service life of pump components • Two-speed operation reduces cycle time for improved productivity
PGM-Series, Gasoline Hydraulic Pumps ▼ Shown: PGM-2408R PGM Series Reservoir Capacity: 4 - 8 litres Flow at Rated Pressure: 0,66 l/min Motor Size: 2,2 kW Maximum Operating Pressure: 700 bar Hoses Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only Enerpac hydraulic hoses.
Directional Control Valves Enerpac hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements… directional control, flow control, or pressure control… you can be sure that Enerpac has the correct valve to match your application Pressure and Flow Control Valves For more hydraulic system control with pressure relief valves, shut-off valves, check valves and sequence valves see our “System Components”. exactly.
Directional Control Valves Section Overview www.enerpac.
Pump Mounted Directional Control Valves ▼ Shown from left to right: VM32, VE33, VM33, VM43L, VE43 Reliable Control of Single and DoubleActing Cylinders and Tools Valve Operation Used with Cylinder Valve Type Manual Single-acting 3-Way, 2-Position Manual Single-acting 3-Way, 3-Position, Tandem Center Manual Double-acting 4-Way, 3-Position, Tandem Center • Advance/Retract and Advance/Hold/Retract operation of single-acting and double-acting cylinders and tools • Manual or solenoid operation • Pum
Pump Mounted Directional Control Valves Adjustable relief valve All valves feature several gauge ports for “system”, A port and B port pressure monitoring. User adjustable relief valves are included on all models to allow the operator to easily set the optimum working pressure for each application. VM33 and VE43 valves include “System Check” feature, for more precise pressure holding and improved system control. The VM33 has improved porting which provides faster cylinder retraction while motor is running.
Remote Manual Directional Control Valves ▼ Shown from left to right: VC-20, VC-4L Remote Control of Single and DoubleActing Cylinders and Tools Locking Valves For applications that require positive load holding, VC-Series valves are available with a pilotoperated check valve. This option provides hydraulic locking of the load until the valve is shifted into the retract position. • Advance/Hold/Retract operation for use with single-acting or double-acting cylinders and tools.
Directional Control Valves Dimensions Pump Mounted Directional Control Valves VM VE VC Series Max. Flow Capacity: VM32 17 l/min ① User Adjustable Relief Valve ② Auxiliary Port VM33, VM33L, VM43, VM43L 1) VM33L and VM43L only Maximum Operating Pressure: 700 bar VE32D Gauges Minimize the risk of overloading and ensure long, dependable service from your equipment. Refer to the System Components Section for a full range of gauges.
System Components & Valves Enerpac System Components: All the additional elements you need to complete your high pressure hydraulic system and get started. Engineered to work with your Enerpac cylinders, pumps and tools, all Enerpac Yellow Pages For sample system set-ups and how to correctly specify your system components, please view the Enerpac “Yellow Pages” section in this catalogue. components are designed to the most exacting standards.
System Components & Control Valves Overview Component Type Series Hoses H700 116 ▶ Couplers A, C, F, T 118 ▶ Hydraulic Oil HF 120 ▶ Manifolds A 120 ▶ Control Manifolds AM 120 ▶ Fittings 121 ▶ Force Gauges Pressure Gauges BFZ FZ XSC GF GP Pressure Gauges, glycerine filled Pressure Gauges, dry G H 124 ▶ Test System Gauges T 126 ▶ Digital Pressure Gauges DGR 127 ▶ Gauge Adaptor Assembly GA45 128 ▶ Gauge Accessories GA NV V V 129 ▶ Pressure and Flow Control Valves www.
H700-Series, High Pressure Hoses ▼ Shown: HC-7206 Safety and Quality To ensure the integrity of your system, specify only Enerpac hydraulic hoses. WARNING ! • Do not exceed 700 bar maximum pressure. • Do not handle hoses which are under pressure. More safety instructions in our ‘Yellow pages’.
High Pressure Hydraulic Hoses H700 Series Inside Diameter: 6,4 - 9,7 mm Internal Diameter (mm) Hose End Assemblies and Couplers * End one ¼” NPTF End two A-630 CH-604 ⅜” NPTF A-604 6,4 ⅜” NPTF AH-604 AH-630 C-604 CH-604 CH-604 CH-604 ⅜” NPTF 9,7 ⅜” NPTF CH-604 Hose Length (m) – – 1,8 – 1,8 0,6 0,9 1,8 3,0 6,1 9,1 15 – 1,8 – – – 1,8 3,0 1,8 0,9 1,8 3,0 0,9 1,8 3,0 6,1 1,8 15 1,8 – 3,0 6,1 9,1 15 1,8 3,0 6,1 Length: Model Number 0,6 -15 m (kg) – – HB-7206QB – HC-7206Q H-7202 H-7203 H-7206
A, C, F, T-Series, Hydraulic Couplers ▼ Shown: FH-604, FR-400, AR-630, C-604, AH-604, AR-400 Quick Connection of Hydraulic Lines Thread sealer To seal nptf threads use one of the new anaerobic thread sealers or Teflon paste. When using Teflon Tape, apply the tape one thread from the end of a fitting to prevent it from winding up in the hydraulic system.
Hydraulic Couplers A, C, F, T CT-604 Safety Tool Use the Enerpac CT-604 to relieve hydraulic back pressure by safely bleeding the hydraulic coupler. NOTE: For use on C-Series 700 bar High-Flow Couplers only Minimize injuries from projectile parts and under-skin hydraulic fluid injections by eliminating unsafe coupler bleeding practices. The CT-604 is Enerpac-engineering safe for use at 700 bar.
Hydraulic Oil, Manifolds and Fittings ▼ Shown: HF-95T, HF-95X, HF-95Y The Genuine Range Hydraulic Oil Contents Model Number 1 litre 5 litres 20 litres HF-95X HF-95Y HF-95T se only genuine U Enerpac Hydraulic Oil. The use of any other fluid will render your Enerpac warranty null and void. ▼ OIL SPECIFICATION CHART • Maximum pump volumetric • Additives prevent rust, oxidation and sludge efficiency • High viscosity index • Maximum internal heat transfer • Maximum film protective lubricity.
Hydraulic Oil, Manifolds and Fittings 3/8" Swivel Connector 29 360 degree swivel coupler for optimal orientation of the hydraulic connection on cylinders, pumps and hoses. Order Model Nr. XSC-1.
Hydraulic Force & Pressure Gauges ▼ Shown from left to right: GF-230B, GF-835B, GP-10S Visual Reference for System Pressure and Force Auto-Damper Valve V-10 For automatic control of gauge fluctuations, the V-10 Auto-Damper Valve controls the movement of the gauge needle by restricting oil flow in and out of the gauge. No adjustments needed.
Hydraulic Force & Pressure Gauges GF GP Maximum Indicator Pointer Indicator retains peak readings of pressure or force generated by the system. Series Can easily be installed on GP and H-Series gauges. Order model nr: BSA-881. Pressure Range: 0 - 1000 bar Force Range: 0 - 2000 kN Pressure Gauges To measure the input pressure into cylinders or high pressure systems. Also for all testing applications.
G, H-Series, Hydraulic Pressure Gauges ▼ Shown from left to right: H4049L, G-2534R, G-4089L, G-2535L, G-4040L Visual Reference of System Pressure GA45GC Gauge adaptor assembly 45˚ Angled gauge adaptor improves safe working conditions.
Hydraulic Pressure Gauges G H Series Size Connection Dimensions (mm) (mm) 63 63 100 100 Lower Mount Center Rear Lower Mount Lower Mount Pressure Range: A B C D E 63 63 100 100 37 37 29 49 ¼" nptf ¼” nptf ¼” nptf ½” nptf 84 – 121 136 – 63 – – 0 - 1000 bar Face Diameter: 63 - 100 mm Accuracy, % of full scale: ± 1,0 - 1,5% Note: dimensions for reference only. Maximum Indicator Pointer Indicator retains peak readings of pressure or force generated by the system.
Test System Gauges ▼ Gauge shown: T-6003L T Series Pressure Range: 0 - 3500 bar Face Diameter: 162 - 192 mm Accuracy, % of full scale: ± 0,5 - 1,5% Cone Mount Gauge Adaptor Contains fittings to connect ¼" cone fitting gauge to ⅜" cone system. Kit includes 43-301 tee, 43-704 gauge adaptor and 45-116 tubing. Order model number: 83-011.
Digital Hydraulic Pressure Gauge ▼ Gauge shown: DGR-2 DGR Series Pressure Range: 0 - 1380 bar Voltage: 3 Volt (battery) Accuracy, % of full scale: ± 0,25% • • • • • Rated for system pressure up to 1380 bar Displays high pressure in bar, psi, MPa and kg/cm2 Zero reset - ensures that gauge reads actual pressure IP65 protection 3 Volt battery included (type CR2430), condition indicator on read-out • Shut-off slectable – menu driven • Protective cover included.
Gauge Adaptor Assembly ▼ Shown: GA45GC GA45GC Series Connection 1: 3/8" NPTF male Connection 2: CR-400 coupler Operating Pressure: 700 bar 45° Angled gauge adaptor improves safe working conditions • 45° angled gauge improves visibility • Slim and narrow design • Easy to fit in a broad range of systems • Maximize controlled load movement • Glycerin dampened gauge with dual scale • Enerpac High Flow female coupler.
Gauge Accessories ▼ Shown from left to right: GA-3, V-91, GA-1, GA-2, GA-4, NV-251, GA-918 GA, NV, V Series Operating Pressure: 700 bar ▼ A gauge is easily installed into your hydraulic system using a gauge adaptor. Gauge Adaptors (GA-Series) • For easy mounting of a pressure gauge onto your system • Male end screws into pump or cylinder port, female end accepts hose or coupler, 3rd port is for gauge connection • GA-918 provides for swivel connection.
Pressure and Flow Control Valves ▼ From left to right: V-152, V-66, V-82, V-161, V-42, V-17 Your Hydraulic Control Solution Valve Applications To see these valves used in typical hydraulic circuits, please see our ‘Yellow Pages’. Page: 250 ▼ The V-152 pressure relief valve limits the pressure or force developed in the hydraulic system.
Pressure and Flow Control Valves Control Manifolds Fittings For two or four port manifolds with integral flow control valves, see the manifold page of the System Components section. or additional fittings F see the fitting page of the System Components section in this catalogue. V Series Page: Page: 120 121 Maximum Operating Pressure: 700 bar Valve Type and Model Number Description Hydraulic Symbol Needle Valve V-82 V-182 V-8F V-82: To control cylinder speed.
