Technical information

77
76
PE-Series,SubmergedElectricPumps
• Two-speedoperationreducescycletimesfor
improved productivity
• Powerful0,37kWinductionmotorissubmergedinthe
oil reservoir to run cooler, protect the motor, simplify
the pump interface, save space and reduce noise
• Large5,5litresreservoirallowsoperationofawide
range of cylinders
• 24VDCremotependantcontroloncertainmodelsfor
safer operation
• Externallyadjustablereliefvalveallowscontrolof
operating pressure without opening the pump
• 40-microninternalreturnlinefilterkeepsoilclean,
promoting longer pump life
• Fulllengthsidetubeforeasymonitoringofoillevel.
Shown: PEJ-1401E
PED Series: with Dump Valve
•Idealforpunching,crimpingandcutting
•Forusewhenloadholdingisnotrequired
•Controlpendantwith3mcordcontrols
valve and motor
5 BASIC PUMP TYPES
Select the model that suits your application.
For special requirements see page 79 or contact your
Enerpac office.
PEM Series: with Manual Valve
•Idealchoiceformostapplications
•Manualvalvecontrol,forbothsingle-acting
and double-acting applications
•Manualmotorcontrol
PER Series: with Solenoid Valve
•Idealforproductionandlifting
•Allvalvesare3positionfor
Advance-Hold-Retract
•Controlpendantwith3mcordfor
remote valve operation
PEJ Series: with Remote Jog
• Forlightproductionandliftingapplications
• Manualvalvecontrolforsingle-actingor
double-acting cylinders
• Controlpendantwith3mcordforremote
motor operation
PES Series: with Pressure Switch
•Designedforcontinuouspressureapplications,
such as clamping, workholding and testing
•Allversionsincludemanualvalvesfor
directional control
BestPerformance
for Mid-Range
Cylinders and Tools
SELECTIONCHART
For more technical information
see next page.
* See the Valve Section in this catalog for
technical information on valve types.