Technical information

118
▼
246
3/8" High Flow Couplers
• StandardequipmentonmostEnerpaccylinders
• RecommendedforuseonallEnerpacpumpsandcylinders
where space and porting permits
• Includes“2-in-1”dustcapforuseonmaleandfemalecouplers
3/8" High Pressure ‘Flush-face’ Couplers
• Featuring“Push-to-connect”operation,toguaranteegood
connection every time
• Flush-face,zero-leakoperationforminimalspillage
• HTMA*recognizedforsafetyandperformance
• Willnotinterchangewithlowpressurecouplers
3/8" Regular Spee-D-Couplers
®
• Formediumdutyapplicationswithhandpumps
• Includesfemalealuminiumdustcap
1/4" Regular Couplers
• Forusewithsmallcylindersandhandpumps
• Includesfemalealuminiumdustcap
1/4" Spin-on Torque Wrench Couplers
• Forusewith700barSandW-Seriestorquewrenches,
THQ-Serieshosesand700bartorquewrenchpumps
1/4" Lock-ring Torque Wrench Couplers
• Forusewith800barHXDandSQD-Seriestorquewrenches,
THC-Serieshosesand800bartorquewrenchpumps .
A,C,F,T-Series,HydraulicCouplers
Quick Connection
ofHydraulicLines
Shown: FH-604,FR-400,AR-630,C-604,AH-604,AR-400
Thread sealer
To seal
nPTF threads use one
of the new anaerobic thread
sealers or Teflon paste.
When using Teflon Tape,
apply the tape one thread from the end
of a fitting to prevent it from winding up
in the hydraulic system.
WARNING!
Couplers should be
pressurized only when
completely connected and
should not be coupled or uncoupled
when pressurized.
More safety instructions in our
‘Yellow Pages’.
Page:
▼ With the use of Enerpac high flow couplers,
hoses are easily installed for multiple hydraulic
line connections in this 34 points PLC-controlled
lifting system.
F-Series
Flush-faced couplers provide
reduced pressure drop versus
other types and are preferred
in dirty, grimy construction and mining
environments due to easy clean, non-dirt
trapping faces.
* Hydraulic Tool Manufacturers Association.