Owner`s manual

Maintenance(45(Serie(
13
THIS PELLET STOVE IS EQUIPED WITH MULTIPLE DEVICES TO ENSURE YOUR SAFETY. HOWEVER
IF A WARNING ERROR CODE STOPS YOUR STOVE ON SEVERAL OCCASIONS, IT IS VERY LIKELY TO
BE THAT THE STOVE DOES NOT EXAUSHT PROPELY. YOU HAVE THE RESPONSIBILITY TO MAKE
SURE THAT THE MAINTENANCE OF THE STOVE IS DONE AS DESCRIBED IN THIS DOCUMENT.
Before resetting the PC-board that displays an error code.
Do FULL stove maintenance As described in this manual.
ERROR CODE RESET
Error Code H
Hold these buttons simultaneously for 3 seconds
« Mode » and « Reset ».
After 3 attempts, the reset is no longer possible
CAUTION
Error Code H after 3 reset
IF THE STOVE WAS RESET 3 TIMES. THERE ARE
GREAT CHANCES THAT THE STOVE DOES NOT
EXHAUST PROPERLY. TO REDUCE THE RISK OF
A FIRE OR A SMOKE DAMAGE IT IS VERY
IMPORTANT TO PERFORM THE MAINTENANCE ON
YOUR STOVE.
CAUTION
ONCE THE MAINTENANCE IS PERFORMED
Press and release the following buttons one button at a time in that order.
Press « Reset » then « Mode » then « + » then « - »
then press and keep pressing the button « speaker » for 3 seconds.