Specifications

32
long enough to achieve a hot fire. The wood should be placed with air in between individual pieces.
Use a poker to make an air channel in the embers below the wood. This will allow air to flow under
the wood for a more efficient burn.
In order to achieve an optimum efficiency from your unit, we suggest that you operate it with the air
control completely closed. Make sure that you have a good fire going and an adequate ember bed
before you completely close the air control. Use a chimney thermometer if necessary. Closing the
air control too soon will lower combustion efficiency and may cause the fire to die out. The addition
of a blower (if not already included) is highly recommended to maximize your unit’s efficiency.
3.6 FAN (BLOWER) OPERATION
Allow the stove to reach operating temperature (approximately one hour) before turning on the fan.
The increased airflow from the fan will cool the firebox and affect the start-up combustion efficiency
if the fan is turned on too quick.
CAUTION: ENSURE THAT THE FAN’S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE STOVE TO
PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.