Product Manual

ST68F / ST90F / SR90F HOW TO REPLACE DOOR PANNEL
1. Remove door from refrigerator.
ST68F HOW TO CHANGE DOOR OPENING DIRECTION
1Remove 2 hinge plates (both
upper
and lower side) and door stopper by pulling out of 6
(Remove hinge pin by use of screw driver.)

screws.
Hinge pin
Door stopper
Upper hinge plate
Lower hinge plate
2. Remove lower pannel frame.
Lower pannel frame
3.
Pull out door pannel gently.
4.
Insert a new door pannel to the door slit.
Caution: Thickness of the door pannel should be 4mm or under.
5.
Fix the lower pannel frame and replace the door following with the reverse order of
2.
Fix the hinge plates at counter side of cabinet end.
3. Pullout screw of door stopper plate and remove door stopper holder.
Door stopper plate
4. Turnover the door stopper

and fix the door stopper holder so as to it can catch door
plate
at counter side of previous setting.
5Fix the door stopper at counter side of cabinet end.
Lower door frame
Push in thin top minus
screw driver between lower
pannel frame and lower door
fram and detouch lower
panne! frame to upper side.
Door stopper

Phillips screw
holder
Phillips screw driver