Network Router User Manual

Chapter5WirelessConfiguration
ThischapterdescribestheEOA7530’swirelesssettings.
5.1SelectingOperatingModes
TheEOA7530supportsthreeoperatingmodes:AccessPoint,ClientBridge,andClientRouter.Using
theproceduresinthefollowingsections,youcanconfiguretheEOA7530touseoneoperatingmode
fora2.4GHznetworkandanotheroperatingmodefor5GHznetworks(seesection5.1.1),orthe
sameoperatingmodefor2.4GHzand5GHznetworks(seesection5.1.2).
5.1.1SelectingSeparateOperatingModesfor2.4GHzand5GHzNetworks
Toselectaseparateoperatingmodefor2.4GHzand5GHznetworks,usethefollowingprocedure.
1.UndertheManagementsection,clickOperationMode.Thefollowingpageappears.



22