Network Router User Manual


Radio
Clicktheradiobuttontoenableordisablewirelessfunctions.
EnableSSID#
TheEOA7530supportsfourSSIDs.EachSSIDcanbeconfiguredtouseadifferent
VL ANtag.
ESSID
ESSIDisthenameofyourwirelessnetwork(WLAN).Inanareawheremorethanone
WL ANispresent,usingadifferentESSIDallowsyoutoseparatethetraffic.Any
deviceyouwanttoparticipateinaparticularWLANmustusethesameESSID.The
defaultESSIDisEnGenius.AfterspecifyingeachESSID,specifytheVL ANIDforeach
ESSID.
5GWirelessSettings
Band
SelecttheIEEE802.11standardoperatinginyournetworkenvironment.
Channel
Youshouldnotneedtochangethewirelesschannelunlessyounoticeinterference
oraresettinguptheEOA7530nearanotherAccessPoint.
DataRate
ShowstheavailabletransmitdatarateoftheWLAN.Thedatarateaffects
throughput.Ifyouselectalowdataratevalue,forexample,thethroughputis
reducedbutthetransmissiondistanceincreases.
AutoChannel
Bydefault,thisoptionisdisabled.IfyouclickEnable,theEOA7530searchesallvalid
channels,thendecideswhichchannelis“cleanest ”fortransmissionsandchangeto
thatchannelautomatically.
2.4GWirelessSettings
Band
SelecttheIEEE802.11standardoperatinginyournetworkenvironment.
26