Network Router User Manual

5.2.3AccessPointMode(2.4GHz)

Radio
SelecttheappropriateradiobuttontoenableordisabletheEOA7530’swireless
functions.
EnableSSID#
TheEOA7530supportsfourSSIDs.EachSSIDcanbeconfiguredtouseadifferent
VL ANtag.
ESSID
ESSIDisthenameofyourWLAN.InanareawheremorethanoneWLANispresent,
usingadifferentESSIDallowsyoutoseparatethetraffic.Anydeviceyouwantto
participateinaparticularWLANmustusethesameESSID.ThedefaultESSIDis
EnGenius.AfterspecifyingeachESSID,specifytheVLANIDforeachESSID.
2.4GWirelessSettings
Band
SelecttheIEEE802.11standardoperatinginyournetworkenvironment.
Channel
Youshouldnotneedtochangethewirelesschannelunlessyounoticeinterference
oraresettinguptheEOA7530nearanotherAccessPoint.
DataRate
ShowstheavailabletransmitdatarateoftheWLAN.Thedatarateaffects
throughput.Ifyouselectalowdataratevalue,forexample,thethroughputis
reducedbutthetransmissiondistanceincreases.
AutoChannel
Bydefault,thisoptionisdisabled.IfyouclickEnable,theEOA7530searchesallvalid
channels,thendecideswhichchannelis“cleanest ”fortransmissionsandchangeto
thatchannelautomatically.
Apply/Cancel
ClickApplytoapplythechangesorCanceltodiscardyourchangesandreturntothe
previoussettings.

Note:Ifyoudonothaveexperiencesettingdatarates,donotchangethedefaultsetting.
29