Network Router User Manual

Inthenextscreen,manuallyenterstaticIPaddressesforthetwodevices.Thismoderequiresthe
EO A7530’sDHCPservertobeturnedoff,asnotedinthetablebelow.Thisisthedefaultsetting.Ifyou
changeit,pleaseturnoffDHCPServerforWDSBridgeMode.


IPAddress
SpecifytheIPaddressoftheEOA7530LANport.
IPSubnetMask
SpecifythesubnetmaskoftheEOA7530LANport.
DefaultGateway
SpecifythedefaultgatewayoftheEOA7530LANport.
802.1dSpanningTree
EnableordisableSpanningTree.Itisdisabledbydefault
DHCPServer 
DHCPServer
DisabletheDHCPservertopreventautomaticallocationofIPaddressestoLAN
clientPCs.ThenconfigureyourPC’slocalIPaddresstoaccesstheWebConfigurator.
LeaseTime
SpecifytheamountoftimeaDHCPnetworkuserisallowedconnectiontothe
EOA7530withtheircurrentdynamicIPaddress.
StartIP
SpecifythestartingIPaddressrangeforthepoolofallocatedforprivateIP
addresses.ThestartingIPaddressmustbeonthesamesubnetastheendingIP
address;thatisthefirstthreeoctetsspecifiedheremustbethesameasthefirst
threeoctetsinEndIP.
EndIP
SpecifytheendingIPaddressrangeforthepoolofallocatedforprivateIPaddresses.
TheendingIPaddressmustbeonthesamesubnetasthestartingIPaddress;thatis
thefirstthreeoctetsspecifiedheremustbethesameasthefirstthreeoctetsin
StartIP.
DomainName
SpecifythedomainnameoftheEOA7530’sprivateLANsettings.
Apply/Cancel
ClickApplytoapplythechangesorCanceltodiscardyourchangesandreturntothe
previoussettings.



34