Network Router User Manual

previoussettings.


7.4PPTP(Point‐to‐PointTunnelingProtocol)
SelectPPTPasyourWANconnectiontypeifyourISPusesaPoint‐to‐Point‐TunnelingProtocol(PPTP)
connection.TherearetwoWANinterfacetypesyoucanselect:DynamicIPAddressandStaticIP
address.SelectStaticifyourISPassignedyoutheIPaddress,subnetmask,gateway ,andDNSserver
addresses.Inmostcases,selectDynamic.

DynamicIPAddress

WANInterfaceType
SelectDynamicIPAddressasyourWANInterface.
Hostname
SpecifytheHostnameisgivenbyyourInternetServiceProvider.

StaticIPAddress

WANInterfaceType
SelectStaticIPAddressasyourWANInterface.
IPAddress
SpecifythestaticIPaddressfortheEOA7530WANInterface.
IPSubnetMask
SpecifytheWANsubnetmask.
EOA7530IPAddress
SpecifytheEOA7530WANIPaddress.

53