Network Router User Manual


Chapter10NetworkConfigurationExample
Thischapterprovidesstep‐by‐stepdescriptionsforusingtheEOA7530’sthreeoperatingmodes.The
AccessPointMode’sdefaultconfigurationallowstheEOA7530toactasacentralunitofaWLANor
asarootdeviceofawiredenvironment.RepeatermodeandMeshnetworkmodeneedmustalsobe
configured(refertothemanualsforthosedevices).

10.1AccessPointMode+ClientBridgeMode



AccessPoint
Step1 Logintotheweb‐basedconfigurationinterfaceusingthedefaultIPaddress
192.168.1.2.
Step2 Select802.11b/gmixedand/or802.11aasyourwirelessmode.
Step3 UseAPScantoscanchannelsinnearbyarea.
Step4 Selectachannelwiththeleastinterference.
Step5 SpecifytheSSIDforyourbroadcastSSID.ConfiguremultipleSSIDsatthesametime.
Step6 VerifytheVLANidentifiertoseparateservicesamongclients
Step7 Setuptheauthenticationsettings.
Step8 ClickApplytosaveallchanges.
Note:DualmodeusesthesameSSIDon5GHzand2.4GHzWLAN.Formoreadvancedsettings,seetheprevious
chapters.



62