Network Router User Manual

ClientBridge
Step1
Logintotheweb‐basedconfigurationinterfaceusingthedefaultIPaddress
192.168.1.2.
Step2 ChangetheoperatingmodetoClientBridge.
Step3 Select5Gor2.4Gasyourwirelessmode.
Step4
UsethesitesurveytoscannearbyAccessPointsandselecttheAccessPointtowhich
youwanttoconnect,orenteranSSIDmanually.
Step5 Selectanauthenticationtypeandentertheappropriatepassword.
Note:thewirelesssilentIPaddressmustbeconfiguredmanuallyusingthesamesubnetastheLANorenablethe
EOA7530’sDHCPservertoretrieveanIPaddressautomatically.

10.2ClientRouterMode
SeethelastsectionforinformationaboutconfiguringtheEOA7530forAccessPointMode.



Step1 Logintotheweb‐basedconfigurationinterfaceusingdefaultIPaddress192.168.1.2.
Step2 ChangetheoperatingmodetoClientRouter.
Step3 Select5Gor2.4Gasyourwirelessmode.
Step4 UsethesitesurveytoscannearbyAccessPointsandselecttheAccessPointtowhich
youwanttoconnect,orenteranSSIDmanually.
Step5 Selectanauthenticationtypeandentertheappropriatepassword.
Step6 SelecttheappropriatetypeofInternetconnectionbasedonyourISP.
Note:Formoreinforma tionaboutInternetconnectionsettings,seetheInternetchapter.
63