Network Router User Manual

10.3WDSBridgeMode



Step1 Logintotheweb‐basedconfigurationinterfaceusingthedefaultIPaddress
192.168.1.2.
Step2 Intheleftpane,gotoManagement>OperationMode.
Step3 UnderPleasechoosetheOperationMode5G,clickWDSBridgeMode.
Step4 ClickApplytosaveyourchanges.
Step5 EntertheDeviceALANIPaddress(forexample,192.168.10.100).
Step6 EntertheDeviceBLANIPaddress(forexample,192.168.10.101).
Step7 Intheleftpane,gotoManagement>Status.
Step8
Under5GHzWDS,findthe5GHzBSSID(MACaddress)ofthedevicesyouwantto
bridgetogether.
Step9 Intheleftpane,goto5GHzWireless>WDSLink.
Step10 IntheChannelfield,selectthedesired5GHzchannel/frequency.
Step11
IntheWD AMA C0field,enterthe5GHzBSSID(MACaddress)oftheWDSlink
partner.
Step12 ClickApplytosaveyourchanges.
Step13 Repeatsteps2through12forbothWDSbridges,sothatDeviceAhasthe5GHz
BSSID(MACaddress)ofDeviceBandDeviceBhasthe5GHzBSSID(MACaddress)of
DeviceA.
Step14 Optional:Goto5GHzWireless>WDSLinkandclickSecuritytosetupwireless
securityfortheWDSbridgemodeconnection.(WEPistheonlyencryptionmethod
supportedfortheWDSbridgemodeconnection.)
64