User`s manual

22
Base Illustration
3. Reset Button
a. Restores base station to factory settings.
b. Reset button is indented to prevent accidental system reset.
c. All handsets (including administrator) and additional base(s)
need to be re-registered after a base station reset.
4. Registration Key (REG)
Enters registration mode along with handset, assigns handset ID
(10-99).
5. L1~L4
Standard RJ-11C/CA-11A connector to plug in the telephone line.
6. Audio-in Jack (3.5mm)
7. DC In: to plug in the power adaptor
1. 4-channel Auto-Attendant
a. 4 Auto-Attendant can be active at the same time in case of 4
simultaneous incoming calls.
b. Allows private paging to a single handset (with individual
Handset ID) or group paging to a group of handsets (with Group
ID).
c. Per line AA enable/disable by administrator.
When disabled for a line, the administrator can set all handsets
to ring with an incoming call on that line, or a particular
Handset/Group ID (either one; not simultaneously) can be
assigned to have both incoming and outgoing call privileges
on that line. See AA Configuration by Administrator.
d. Up to 128 seconds customizable main greeting message.
e. Default of 4 lines AA is OFF.
Additional Base Station Features