User`s manual

30
Basic Operations
Operation Modes
Both the base station and handset have levels of operation at which time
only certain procedures of functions can be performed.
Re: The main difference between DuraFon PRO and DuraWalkie is the
handset of DuraFon PRO has the capability to make telephone calls,
and the handset of DuraWalkie does not.
A. Base Operation Modes
1. IDLE mode- this is the default mode. The “Intercom”, “Broadcast”, and
“Volume keys” are active in IDLE mode.
2. TALK mode- the base operates in this mode during a phone call,
intercom use, and broadcast operation. The “In Use” , “Intercom”, and
“Broadcast” LED will light up respectively.
3. REGISTRATION mode- the base enters this mode by pressing the
button for three seconds. There are no active base unit keys once this
mode has been entered. Four LEDs will light up in Registration mode.
B. Handset Operation Modes
1. IDLE mode- this is the default mode.
a. If there is no on-going activity, the handset automatically goes into
SLEEP/IDLE mode to save battery power.
b. The handset can be turned off completely by holding down the
key for 3 seconds.
c. The idle screen display (custom name) can be edited.
d. The 2-digit number represents the handset ID.
2. Menu mode
REG
END
a. Press the (Right softkey) function key to activate MENU mode.
b. In MENU mode, the handset settings and information contained in
memory can be changed.
c. The functions available through the MENU selection are covered in
greater detail from page 53.
d. The MENU structure display as below: