User`s manual

34
1. Press , wait for dial tone, and then enter phone number.
2. Alternatively, you can enter phone number first then press Key.
When using this method, you can use the (Left) and
(Right softkeys) to edit the number entered. “Delete” erases the last
digit entered. “Clear” erases the entire line but remains in the dialing
mode.
3. Speed dial by access the entries in the phone book.
a. Press or scrolling key to enter the phone book.
b. Press to dial the number.
4. To abort dialing, press key.
5. During the call, press and hold the Key to activate the
speakerphone.
Notes:
1. After a link is established, the Base ID will appear on the upper-
right corner.
If no Base ID shows up, it implies that you are approaching the
boundary of the coverage.
2. If the line is occupied, the LCD shows “No Line Available” and
handset returns to standby mode.
3. If a link cannot be established, the LCD will show “No Connection”
after a 12-second time out.
4. A call duration timer will start displaying the length of the call after
link is established.
The EnGenius Industrial Cordless Phone System offers private,
Intercom/2-way radio calls independent of the base station.
Intercom/2-way communication can be placed from handset to handset.
Handset to Handset Calls.
Making a Telephone Call (For DuraFon PRO only)
Making a 2-Way/ Intercom Call
TALK
TALK
CLEAR DELETE
TALK
END
TALK
Basic Operations