User`s manual

Basic Operations

Notes:

1. You need to continuously press key when doing

broadcast. The broadcast will be over once user release the key.

2. You need to notice that there is no bi-bi-beep sound when

receiving a broadcast.

3. You can press the (Left softkey) if you choose to ignore

the call. The key operation is valid only for the current

call. You can silent all broadcast by turning off the ringer to set

auto-silence from the handset menu.

1. Press (Left softkey).

2. The LCD shows the last phone number dialed. To dial this number,

press (Left softkey).

3. Use Up or Down Arrow Key to scroll through the last 10 phone numbers

dialed. Select and press key.

Note:

Intercom numbers (Handset ID) are not stored in the last 10 numbers

dialed log.

1. When an incoming call arrives, the handset will ring or vibrate unless

the ringer has been turned off.

2. If the handset is on the charger cradle (ringer will be temporarily

switched to “Ring” if it has been set to “Vibrate” ), lift the handset and

start the conversation.

3. If the handset is not on the cradle, press any key (except , and the

softkey) to answer.

4. During the call, press and hold the Key, the speakerphone is active.

Re:DuraW alkie handset can’t receive a telephone call directly, but it can

receive a transferred telephone call from PRO handset.

BROADCAST

SILENT

REDIAL

DIAL

END

SILENT

TALK

Redial (For DuraFon PRO only)

Receiving a Telephone Call (For DuraFon PRO only)