User`s manual

Basic Operations

To end a telephone or intercom call, press key or place handset into

charging cradle.

1. Voice volume can only be adjusted during a call.

2. There are 6 levels of volume selections. Default as volume 4. Use

and scrolling key to adjust.

3. The new setting remains effective for all future calls until changed

or handset is power down.

1. For calls held at DuraFon PRO Base only

2. When a call is in progress, it can be put on hold by pressing the

(Right softkey).

3. To return to the conversation, press .

Notes:

1. The call being placed on hold can only be removed from by

the handset that puts it on hold.

2. Handset LCD displays a call is being on hold. An alert tone (double

beep) every 30 seconds will remind the handset that a call is being

on hold.

3. If the operation (e.g., call transfer) after putting a call on-hold fails,

the held call may be dropped.

4. You can power off the handset (e.g., change battery) while call is

on hold.

5. After power on again, you can continue the call by pressing

(Left softkey) or select from the Option menu to

terminate the hold state. You can only unhold the call when within

Ending a Call

Adjusting Receiver (Earpiece) Voice Volume

Placing a Call On Hold (For DuraFon PRO only)

END

HOLD

UNHOLD

HOLD

UNHOLD