User`s manual

42
Advanced Operations
f. Press the handset number key , this completes the de-registration
process. Upon successful de-registration, the handset will show ID “00”.
Notes:
1. The base has a 30 second registration timeout starting from
pressing the button. The handset has a 12 second registration
timeout starting from the time registration or de-registration option
has been selected. The base and handset will automatically exit
registration mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.
1. Advanced registration functions can be performed by administrator
handsets (ID 10 and 11) only.
2. Administrator handsets can perform advanced registration function
as long as it is within range with the base station. The base station
does not need to be in registration mode.
3. De-register a Handset ID by administrator:
a. Make sure that the administrator handset is within the coverage
range of the base station.
. b. Press administrator handset (Right softkey)
c. Press number , this will enter the handset administration menu.
d. Press number , handset enters system setting menu.
e. Press number , and enter the two-digit Handset ID to be cleared.
f. Upon successful operation, the handset LCD will display “Done”,
otherwise it will show “Message not received, try again”.
4. Obtain a Specific Handset ID:
a. If a particular Handset ID is preferred over sequentially assigned ID,
the administrator can “tel” the base in advance what the next ID
assignment should be.
b. Press administrator handset (Right softkey).
c. Press the number , this will enter the handset administration menu.
d. Press number , handset enters system setting menu.
e. Press number , and enter the two-digit Handset ID to be assigned
next by the base.
f. Upon successful operation, the handset LCD will display “Done” ,
otherwise it will show “Message not received, try again”.
2
MENU
9
1
2
MENU
9
1
5
REG
Advanced Registration