User`s manual

Advanced Operations

functions on two separate phone lines.

2. This feature only works for 2 lines, if a 3 phone call comes for the

same handset, the call will not be routed to the handset.

Call Waiting (For DuraFon PRO only)

1. A handset, while talking on one phone line, can be informed of the

arrival of a new incoming phone call.

2. For example, suppose that Handset 15 is talking on Line 1. When a

new call comes in on Line 4 and the caller enters extension number

*15* when prompted by the AA, or if the call is set to be routed to

Handset 15 when AA is disabled.

. The base station recognizes that Handset

15 is busy. Instead of announcing to Line 4 that Handset 15 is busy, the

base sends an alert to Handset 15.

. Upon receiving the alert, the handset sounds an audible double beep

alert and LCD displays “New call on Line 4”.

. Handset 15 can:

a. Ignore the new call; continue talking to Line 1.

b. Press key to switch to Line 4.

c. Subsequent pressing of key will toggle between Line 1 and

Line 4.

d. Press key while talking to a line will terminate that particular

call and automatically switch back to talking to the remaining line.

Notes:

1. This built-in call waiting is separate from the Call Waiting feature

available from the local phone company. The phone company

provided Call W aiting functions on the same phone line, while the

DuraFon Call Waiting

Switch

FLASH

END

4. Press number , handset enters Base Select setting mode.

5. Use or arrow to scroll up and down the selection (On/Off)

6. Make a selection (default =off), and press (Left softkey).

Re: When turns on the Base Select, you must enter 2-digit Base

ID after press the key.

SAVE

TALK

Notes:

1. Because this setting allows handset manually select the base

station, the handset must be in range with the desired base station.