User`s manual

56
a. The greeting message: “Please enter the extension number” .
b. If there is no entry after 5 seconds, the broadcast will be enabled to
all handsets.
Note:
1. Line 3 and or 4 can be reserved for broadcast function.
2. For a single broadcast port; reserve Line 3 for broadcast and
line dedicate (see pg. 46) Line 4 to a non-existent handset (ie:
99).
3. A base unit configured with a single broadcast port Lines 1 and
2 may be used as standard telephone ports or lines.
4. For dual broadcast ports; reserve Line 3 and 4 for broadcast and
line dedicate Lines 1 and 2 to a non-existent handset (ie: 99)
5. Broadcast is limited to 30 seconds.
Advanced Operations
4. Press number , handset enters Line setting menu.
a. Enter Base ID (00~07) to access base.
b. Press to enter Broadcast setting.
5. When calling through the line 3 or 4, the caller will be prompt ed by the
greeting message to enter a two-digit extension number ( “01” ~ “07”
for Group ID: “10” ~ “99” for Handset ID: “00” for all).
2
1
i. Press or to select L3 or L4 (the status of setting will be
displayed on LCD)
ii. Press to enter the setting mode, and the base ID will be
displayed on LCD.
iii. Press (Left softkey) to enable the broadcast function. Press
(Right softkey) to disable the broadcast function.
iv. After setting broadcast, press (Left softkey) to enable the AA.
Press (Right softkey) to disable the AA.
Re: L3 and L4 can be setting as two broadcast lines, repeated
nd
above items for setting 2 broadcast line.
CHANGE
ON
OFF
ON
OFF