User`s manual

5. Press to set sound-related settings:
a. Press to select ringer volume: Use or to scroll through 6
options: Low, Medium, High, Vibrate, Vib and Ring, Off. Press
(Left softkey) to save selection. Default = High.
b. Press to select ringer tone: Use or to scroll through 4
options: 0, 1, 2, and 3. Press (Left softkey) to save selection.
Default = 0.
c. Press to select key volume when a key is pressed: Use or
to scroll through 3 options: High, Low, and Off. Press
(Left softkey) to save selection. Default = Low.
d. Press to select key tone: Use or to scroll through 4
options: 0, 1, 2, and 3. Press (Left softkey) to save selection.
Default = 0.
6. Press to change handset settings:
a. Press to set dialing prefix:
i. Use or to scroll and select to turn on or off the dialing
prefix feature. Default = Off.
ii. If “On” is selected, the handset is prompted to enter a prefix, up to
14 digits.
iii. Use (Right softkey) and or to edit prefix.
iv. When this feature is turned on, the LCD will prompt the user on
each outgoing phone call except during redial or dialing by
pressing the key first whether to use the dialing prefix. The
current prefix is also displayed. Press (Left softkey) or
(Right softkey) to add the prefix to the beginning of the number.
v. This feature is useful for access code, calling card, and credit
card calls, etc.
b. Press to Group Select: see Handset Group Subscription.
c. Press to set or turn Base Select on or off. Default = Off.
See Base Select.
2. Caller ID service is required from your local phone company in
order to receive phone numbers, names and time stamps on
incoming calls. The Received and Missed Call Logs will register
no incoming calls if Caller ID service is not available.
3. The Caller ID feature may not be supported by all PBX or Key
systems’ analog ports, check with your equipment provider.
4
1
SAVE
2
3
SAVE
4
SAVE
5
1
DELETE
TALK
YES NO
2
3
SAVE
59
Advanced Operations