Operation Manual

This page displays the current status of the Wireless

settings of the ENS Dual Band series.

2.4 GHz/5 GHz Wireless Network

Operation Mode: Select Operation Mode. The ENS Dual

Band series supports three different operation modes:

Access Point, or WDS (WDS AP, WDS Bridge, and WDS

Station).

Wireless Mode: Supports802.11b/g/nmixedmodein2.4

GHzand802.11ac/a/nmixedmodein5GHz.

Channel HT Mode: The default channel bandwidth is 20

MHz/ 40 MHz. The larger the channel, the greater the

transmission quality and speed.

Extension Channel: Select upper or lower channel. Your

selection may affect the Auto channel function.

Transmit Power: Sets the power output of the wireless

signal.

Data Rate: Select a data rate from the drop-down list. The

data rate affects throughput of data in the ENS Dual Band

series. Select the best balance for you and your network but

note that the lower the data rate, the lower the throughput,

though transmission distance is also lowered.

RTS/CTS Threshold:Speciesthethresholdpackagesize

for RTC/CTS. A small number causes RTS/CTS packets to be

sent more often and consumes more bandwidth.

Client Limits: Limits the total number of clients.

Aggregation: Merges data packets into one packet. This

option reduces the number of packets, but also increases

packet sizes.

AP Detection: AP Detection can select the best channel to

use by scanning nearby areas for Access Points.