Operation Manual

Management VLAN Settings

This page allows you to assign a VLAN tag to packets sent

over the network. A VLAN is a group of computers on a

networkwhosesoftwarehasbeenconguredsothatthey

behave as if they were on a separate Local Area Network

(LAN). Computers on VLAN do not have to be physically

located next to one another on the LAN.

Note: Only applicable in Access Point and WDS AP

modes.

Management VLAN: If your network includes VLANs, you

can enable Management VLAN ID for packets passing

through the Access Point with a tag.

Save: Click SavetoconrmthechangesorCancel to cancel

and return to previous settings.

Note: IfyoureconguretheManagementVLANID,you

may lose your connection to the ENS Dual Band series.

VerifythattheDHCPserversupportstherecongured

VLAN ID and then reconnect to the ENS Dual Band series

using the new IP address.