by Dana Brush Cutter User Manual
English – 33
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 240R 245R 245RX
Engine
Cylinder volume, cu.in/cm
3
2,45/40,2 2,70/44,3 2,70/44,3
Cylinder bore, inch/mm 1,57/40 1,65/42 1,65/42
Stroke, inch/mm 1,26/32 1,26/32 1,26/32
Idle speed, rpm 2700 2700 2700
Recommended max. speed, rpm 12500 12500 12500
Speed of output shaft, rpm 9190 9190 9190
Max. engine output, acc. to ISO 8893 1,8/9000 2,0/9000 2,0/9000
Catalytic converter muffler No No No
Ignition system
Manufacturer/type of ignition system EM/ET EM/ET EM/ET
Spark plug
NGK BPMR 7A
Champion RCJ 7Y
NGK BPMR 7A
Champion RCJ 7Y
NGK BPMR 7A
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor Walbro WT Walbro WT Walbro WT
Fuel tank capacity, US pint/litre 1,70/0,8 1,70/0,8 1,70/0,8
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 19,0/8,6 19,0/8,6 18,5/8,4
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
100/104 100/104 100/104
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 2,1/2,1 2,3/2,7 2,3/2,7
At idle, left/right handles, max.: 2,4/2,8 3,2/3,5 3,2/3,5
At max. speed, left/right handles, min.: 2,9/2,4 3,3/3,5 3,3/3,5
At max. speed, left/right handles, max.: 4,0/3,5 4,8/5,4 4,8/5,4