Installation Manual

IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation

Step 4: Create an Installation Map

The Enphase Installation Map is a diagram of the physical location of each microinverter in your PV

installation. Copy or use the blank map on page 38 to record microinverter placement for the system or

provide your own layout if you require a larger or more intricate installation map.

Each Enphase Microinverter, Envoy, and Battery have a removable serial number label. Build the

installation map by peeling the serial number labels from the microinverter mounting plates and placing

the labels on the map. You will also place the Enphase IQ Envoy and IQ Battery serial number on the

map after installation.

After you have created the installation map, use the Enphase Installer Toolkit mobile app to record serial

numbers and configure the system.

For Installer Toolkit details refer to “Detect the Microinverters” in the help topics of the Installer Toolkit

app.

A. Peel the removable serial number label from each microinverter and affix it to the respective

location on the paper installation map.

B. Peel the label from the IQ Envoy and any Enphase Battery, if installed) and affix it to the

installation map.

C. Always keep a copy of the installation map for your records.

Affix serial number

labels