IQ7 Micro Installation

IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation

Parts and Tools Required

In addition to the microinverters, PV modules, and racking, you will need the following:

Enphase Equipment

• Enphase IQ Envoy gateway (ENV-IQ-AM1-240) required to monitor solar production. For

installation information, refer to the Enphase IQ Envoy Installation and Operations Manual.

• Enphase Installer Toolkit

Download the Enphase Installer Toolkit mobile app and open it to log in to your

Enlighten account. With this app, you can scan microinverter serial numbers and

connect to the IQ Envoy to track system installation progress. To download, go to

enphase.com/toolkit or scan the QR code at right.

• Tie wraps or Q Cable Clips (Q-CLIP-100)

• Enphase Sealing caps (Q-SEAL-10) for any unused drops on the Enphase Q Cable

• Enphase Terminator (Q-TERM-10) typically two needed per branch circuit

• Enphase Disconnect Tool (Q-DISC-10)

• Field Wireable Connectors (male and female: Q-CONN-10M and Q-CONN-10F)

• Enphase Q Cable:

Cable Model

Connector Spacing

PV Module

Orientation

Connector Count per

box

Q-12-10-240

1.3m

Portrait

240

Q-12-17-240

2.0m

Landscape (60-cell)

240

Q-12-20-200

2.3m

Landscape (72-cell)

200

Other Items

• Number 2 and 3 screwdrivers

• Wire cutters, voltmeter

• Torque wrench, sockets, wrenches for mounting hardware