IQ7 Micro Installation

IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation

Step 8: Complete Installation of Junction Box

A. Connect the Enphase Q Cable into the junction box.

B. Refer to the wiring diagrams on page 40 for more information. Wire colors are listed in the

following table.

Wire Colors

L1 – Black

L2 – Red

Step 9: Connect the PV Modules

WARNING: Electrical shock hazard. The DC conductors of this photovoltaic system are

ungrounded and may be energized.

A. Connect the DC leads of each PV module to the DC input connectors of the corresponding

microinverter.

B. Check the LED on the connector side of the microinverter. The LED flashes six times when

DC power is applied.

C. Mount the PV modules above the microinverters.

Status LED

DC Connector

AC Connector