User guide

13
Controls
1 Antenna \ Antenna
Connector: Used to attach the
antenna of the radio.
2 Accessory Connector: The
accessory connector and
accessory cover.
3 Encoder: The rotary controller.
4 LCD: The LCD of the radio.
5 Scan Button: Starts / Stops
scanning the memorised
channels.
6 Up Button: The up button is
used to change the channels.
7 Down Button: The down
button is used to change the
channels.
8 [MEM] Memory Button: The
Memory button memorises a
desired channel for scanning.
9 Monitor Button: Press to
monitor the channel without the
squelch mute.
10 Power Button: Powers the
radio on and off.
11 16 Button: Pressing the button
selects channel 16.
12 Speaker: The radio’s speaker.
13 Microphone: Internal
condenser microphone.
Common