User Manual

22
Programming your HT446L radio
The radio’s frequency and tone configuration can be changed in user programming mode.This will
allow you to put any of the standard frequencies or tones in to any channel position.When a radio
has been configured this information can be quickly and easily cloned into other units using an
optional cloning cable.
Checking the current configuration
• The display will show the selected channel,
the PL/DPL tone and the frequency.
Changing the assigned frequency
• Press the top side function button to
highlight the frequency field. Turn top rotary
control to change the frequency. Press PTT
button to save the selection. Frequency
table is on P.15).
Changing the assigned tone
• Press the top side function button to
highlight the tone field. Turn top rotary
control to change the tone. Press PTT
button to save the selection. (Pressing the
lower side function button whilst turning the
rotary control will change the selection in
increments of 10.)
Check / Modify the Frequency/Tone
To put radio in to user programming mode
• Press and hold the top side function button
and PTT button and turn the radio on.
• The radio will emit a beep to
confirm “user programming mode” has
been entered.
HT446L
• Key Bleeps Off
• Keypad Locked
• Bluetooth device connected
• Accessory Connected
• VOX Enabled
• Scramble Enabled
• Battery State
• Receive strength
LCD Indicators
RX
21