- Cabletron Module Guide Fast Ethernet SmartSwitch (8H02_16, 2E42_27, 2E42_27R, 2E43-27, 2E43-27R)

SPECTRUM Support
Introduction Fast Ethernet SmartSwitch Module
1-2 Management Module Guide
The 2E43-27 and 2E43-27R provide the same feature set as the 2E42-27 and
2E42-27R but come equipped with two RJ21 connectors to support 24 ports of
switched Ethernet rather than the 24 RJ45’s. This allows the use of Telco
cables in the wiring closets with patch panels to reduce the complexity of cable
management.
All five devices offer RMON, port redirection, broadcast suppression, and full
duplex support on all interfaces, with support for IEEE Auto-Negotiation on
the 100Base-TX ports.
SPECTRUM Support
When modeling a device, the model type SS8H appears in the Select Model
Type dialog box. The names listed below refer to the model names used in
SPECTRUM to specify attributes, actions, and associations for Fast Ethernet
SmartSwitch Modules:
• 8H02_16 (Fast Ethernet SmartSwitch Module, Model 8H02-16)
• 2E42_27 (Fast Ethernet SmartSwitch Module, Model 2E42-27)
• 2E42_27R (Fast Ethernet SmartSwitch Module, Model 2E42-27R)
• 2E43_27 (Fast Ethernet SmartSwitch Module, Model 2E43-27)
• 2E43_27R (Fast Ethernet SmartSwitch Module, Model 2E43-27R)
Accessing SPECTRUM Views from the Device Icon
The Device icon provides access to SPECTRUM views that display device-
specific information. Access these views using double-click zones (Figure 1-1)
or Icon Subviews menus (Figure 1-2).
To access the Icon Subviews menu, do the following:
1. Highlight the icon.
2. From the View menu, select Icon Subviews or click the applicable mouse
button (middle or right). Refer to the Operator’s Reference for
information on configuring your mouse.