- Cabletron Module Guide Fast Ethernet SmartSwitch (8H02_16, 2E42_27, 2E42_27R, 2E43-27, 2E43-27R)

9032073 E2 Application Views
5-5
Interface Remap Application
Interface Remap Application
The name of the model type used to model the application is CtIfRemapApp.
The application provides the ability to map one or more interfaces to another
interface. A map is defined by creating a row in the Interface Remap Table
(described below) to specify the source and destination interfaces. When a
source interface is remapped to a destination interface, the destination
interface transmits all packets received or transmitted on the source
interface. Counters on the destination interface increment for all packets
transmitted by normal bridging or due to the interface remap. Figure 5-3
shows a view of the Interface Remap Table.
Access the Interface Remap Table as follows:
1. Highlight the CtIfRemapApp icon (Icon mode) or text label (List mode).
2. From the View menu, select Icon Subviews -> Port Remap.
The Interface Remap Table provides the following information:
Number Entries
The number of active entries in the Interface Remap Table.
Physical Errors Enable
Physical error remapping can be Enabled, Disabled, or Unsupported.
Unsupported indicates that the device is incapable of remapping physical
errors.
Max Number Entries
The maximum number of entries allowed in the Interface Remap Table.
Used to sort the Interface Remap Table.
Used to search the Interface Remap Table for a specific interface.
Used to update the Interface Remap Table.
Source Port
The source interface that will have packets redirected to the destination
interface as defined by Destination.
Destination
The interface that will see all packets redirected from Source Port.
Sort
Find
Update