User's Manual

Pre-Installation Tasks
1-6 DC Power Supply Installation
2. Usetheinformationfromtheoutputoftheshow system hardwarecommandto
fillouttheworksheetinTable 1‐1foreachmoduleasfollows:
a. Usethevalueof“940Partnumber:”fromtheoutputoftheshowsystem
hardwarecommandtofilloutthe940PartNumbersectionofTable 1‐1.
b. Use
thevalueof“940Serialnumber:“fromtheoutputoftheshowsystem
hardwarecommandtofilloutthe940SerialNumbersectionofTable 1‐1.
3. ComparethevaluesintheshadedcellsofthecompletedworksheetinTable 1‐1tothe
minimumvaluesshowninTable 1‐3onpage 1‐8
todeterminetheDCcomplianceof
theinstalledmodules.
Note: In the CLI output for show system hardware, model name part numbers of modules
are labeled “Part number.”
Table 1-1 Worksheet: DC Compliance of Modules in Existing AC Systems
Model Part No. 940 Part Number 940 Serial Number DC Compliant?
940 Last 4 digits of
940 Number
Site Code Date Code
(year, work
week)
Serial
Number
Counter
Site
Code
940
Revision
Example: X-CM-00 940 4179 000 0747 5281 63 5A YES