User's Manual

Installing the DC Power Supply

1-12 DC Power Supply Installation

5. Holdthepowersupplybyplacingonehandonthehandlelocatedonthefrontpanel

andusingyourotherhandtosupportthepowersupply.

6. Positionthepowersupplywiththeflangeandcaptivescrewpointingup(ortothe

rightfortheEnterasysMatrix™X4‐Cchassis)andalign

withtheslotopening.

7. Insertthepowersupplyintotheopeningandcarefullyslidethemoduleuntilit

connectstothebackplane,asshowninFigure 1‐4.Themoduleshouldbenearlyflush

withthe faceoftheMatrixXchassis.Ifsign ificantresistanceisencounteredbeforethe

powersupplyis

seated,removeandreinsertit.Donotforcethemoduleintoplace.

Figure 1-4 Installing Power Supply Module

8. Securethepowersupplytothechassisbytighteningthecaptivescrew.

9. Ifyouareinstallingadditionalpowersupplies,removethecoverplates

fromtheir

slotsbylooseningtheircaptivescrews,asshowninFigure 1‐5,andrepeatsteps4

through8toinsertthemintothechassis.

Keepthecoverplatesinasafelocationintheeventyouneedtoremovethepower

supplyandreplacethecoverplate.

Caution: Forcing a misaligned power supply into place can damage the power supply or

chassis backplane.

Precaución: Colocar de manera forzada una fuente de poder o no colocarla bien alineada

podría dañarla y/o maltratar el panel posterior del chasis.

1 Power supply 3 Power supply slot 1 5 Power supply flange

2 Power supply handle 4 Captive screw